Lenovo Answered Questions & Fixed Issues

Try changing the resolution while display 2 is plugged in and active. You can also try changing Display 1 resolution (even if its your main screen)

Find out what is causing the alarm (battery) and turn it off in the menu of that category. You can also try look in the BIOS (press F1 during boot)

If you bought the Lenovo at a local dealer, take it back to them. If you bought it through an online dealer, I recommend you track down Lenovo customer support.

Hi Schae, so you say you can have a conflict in the BIOS or Microprocessor I suggest you look for a technician specialized in Lenovo Greetings Franco Dosil Hola Schae, por lo que comentasm uedes tener un conflicton en la BIOS o el MicroProcesador Te sugiero busques un tecnico especializado en Lenovo Saludos Franco Dosil

By the looks of the information you gave me...it seems that FIFA '11 might not be able to or may have a real hard time playing on your machine, but it doesn't hurt to try! If it doesn't work, then just simply uninstall it.
Hope this helps ^_^

Hard Reset

1-Unplug the device and power off by holding the power button down
Wait 5 seconds, then

2- hold down both the volume up and power buttons (volume up is the side of the long button that is closest to the power button), until you see a screen with “Select Boot Mode” text on it. When you see that, release both buttons.

3-Press the volume up button to move the arrow until it is pointing at the “Recovery Mode” option, then press the volume down button to select it.

4-The “android” logo should appear for a few seconds, then you should be in the “Android system recovery” menu.

5-Use the volume up / down buttons to highlight the “wipe data/factory reset” option, then press the power button to select it.


6-Use the volume up / down buttons to highlight the “Yes — delete all user data” option, then press the power button to select it.

7-Once that has completed, you should be returned to the “Android system recovery” menu. Make sure the top option, “reboot system now”, is selected, then press the power button to select it.

8-The device should reboot and display the “android” logo, followed by the swirling coloured dots. You can then plug the device back in and wait for it to boot up. This will take a long time (up to around 5 minutes).


9-Once the device has booted back into the app, you should be able to set up the wifi, log in with your credentials and re-download your property data.

I have gotten over this problem in the past....
I was locked out a while but they will eventually reset it for you if you keep at it.....

Or perhaps you can remember the silly password you thought you would be able to remember...

A good option might be to start a new one but then again I know I avoided this answer....
Be wary on your way a lot of scammers out there will claim they can help you for $10 or $45 but Google won't charge you to reset your password for you.

Run antivirus scan right after startup. Maybe try AVG (FREE) https://www.avg.com/en-us/virus-removal

You need to get a hold of a windows xp recover boot cd/usb. You can download it on the internet (if you can with something else than the lapop)

Make sure you are using a charger when doing this. One with 20v and 4.5A

Make sure the external screen is on when starting laptop. Make sure the laptop is charging (use the recharger). Also try close the laptops screen down (so screen turns off) and click or move mouse. Then open again and see if the other screen is active.

Windows does not include software to play movie DVDs.
You need to purchase software to perform this task.
I use Corel's WinDVD.

Good luck!

Code 43 Error Message

The Code 43 error is one of several Device Manager error codes. The Code 43 error will almost always display in the following way: "Windows has stopped this device because it has reported problems. (Code 43)" Details on Device Manager error codes like Code 43 are available in the Device Status area in the device's properties: How To View a Device's Status in Device Manager.

Cause of the Code 43 Error

A Code 43 error is generated when Device Manager stops a hardware device because the hardware reported to Windows that it's having some kind of unspecified problem. This extremely generic message could mean there's a true hardware issue or it could simply mean that there's a driver problem that Windows isn't seeing as such but that the hardware is being affected by.

Error Code 43 Troubleshooting

Restart your computer if you haven't done so already. There is always the chance that the error Code 43 you're seeing on a device was caused by some temporary problem with the hardware. If so, a restart of your computer might fix the Code 43 error. Note: Some users have also reported that powering off their computer completely (not just a reset) and then turning it back on has corrected their Code 43 issue, especially if it exists on a USB device. In the case of a laptop, turn it off and remove the battery, wait a few minutes, and then put the battery back in and start the computer.Did you install a device or make a change in Device Manager just before the Code 43 error appeared? If so, it's very possible that the change you made caused the Code 43 error. Undo the change if you can, restart your PC, and then check again for the Code 43 error. Depending on the changes you made, some solutions might include:

• Remove or reconfigure the newly installed device.
• Roll back the driver to a version prior to your update.
• Use System Restore to undo recent Device Manager related changes.

If this is Windows you possibly have the wrong language set for your keyboard or the font doesn't have one. If you don't want to mess with your settings there 2 ways (possibly more) one is with the cursor where you want the ~ put keypad into numeric, press and hold the alt key type 0126 on the keypad let go the alt key or run charmap which is part of Windows highlight the ~ (about 4 lines down in Arial) press select then press copy and past it as required. I hope this helps

It really depends on the DVD content. Commercial DVDs are copy-protected, and unless you have specialized (and usually *******) software, you copy attempts will not work. Home-recorded DVDs can be copied, but again, content is key. You can do something as simply as copy the files to the hard drive and re-burn them to the new DVD, but that will produce a DVD that will work in a PC but might not work in a DVD player is there is video content to be watched. You can copy the disc as a single-file ISO, which provides an exact copy of the disc. To do that you'll need a program that can make and burn ISO files. There are a number a free ones available out there, just be careful what you go for as some are known to be accompanied by adware.

no, but I can't see you or it pushing it.

it is not just a monitor there is PC there, no PC stated, they work as TEAM. ok. that being said, 14year old monitors. no not SAFE but power saver mode, also called SLEEP MODE to save power losses, (Energy Star and GREEN ) the manual covers this. 9227-AC1 (you missed typing fully this) 'Lenovo ThinkVision L171 9227-AC1 17" LCD Monitor.' AC1 is non USA. this is very old monitor and all have this OLD style internal sleep mode. covered in the manual. circa 2005 old. most this old are dead now from dead CCLF back lamp tubes. but the manual shows push menu key on front then in the OSD MENUS WE THEN FIND sleep timer (clock) Inside the monitor, http://www.manualsdir.com/manuals/165841/lenovo-l171.html if the PC is silent the monitor goes to sleep. if the PC goes to sleep wiggle the mouse or hit space bar until PC wakes up. if sleep is bad in PC turn sleep off. if PC is dead, then that is wrong. test the monitor in 2nd PC if monitor works there the monitor is ok, and PC1 is bad.

really why not ask the game maker directly for help with your w10. here they are right>? https://www.mygames.com/ so what do THEY say , it is there code, running. does Tetris fail or just your games, unnamed, this maker is bad company they take over your PC why run this crappp? it takes over your browser, and more, and is bad. the do not even have minimum system requirement there. nor support. avoid like the Plague.

If its windows media player that isn't playing the dvd's then you'll need to go here and get the latest version of windows media player and also get the latest codecs.

http://www.microsoft.com/windows/products/winfamily/mediaplayer/default.mspx

If you have a different dvd player that came with your laptop, then use the other dvd software and see if you can play your dvd that way.

what OS is this, there.? windows 10 or ?