Jet Tech Systems Refrigerators - Popular Questions, Answers, Tips & Manuals


Make up a way to blow warm air from the condenser over the glass and your frost problem will disappear! The higher the temperature of the air - the more moisture it can absorb. The reason you are having the problem is that you are cooling moisture laden air and it has to give up the moisture as you cool it. So run some warm air over it and it will absorb the moisture for you = problem gone.

koolman77 (refrigeration technician)

Jet Tech Systems... | 66 views | 0 helpful votes


Depends on the settings you set the frig and freezer to , as soon the settings are reached it should shut off, anything longer than a few hours points to a fault.

Refrigerators | 956 views | 0 helpful votes


Need a little more info, but it should have a removable container that hold the ice. That comes out. If it is too jammed up with ice to move it, you will have to carefully chip away at some of it, or let it thaw. Once you are able, take the container out and empty it completely dry it out. If that doesn't do it, there is a problem with the mechanism.

Refrigerators | 230 views | 2 helpful votes


Google

make model remove freezer drawer

impossible to guess what you have.

Refrigerators | 724 views | 0 helpful votes


Defrost and switch power after 24 hours

Refrigerators | 890 views | 0 helpful votes


short -seized--thermal safety fail electrical circuit problem

Refrigerators | 191 views | 1 helpful votes


Have you reset the icemaker? Usually there's a lever or switch that you have press to reset it. You did not post the make/model of your fridge so it's difficult to say which reset device you have.

Refrigerators | 422 views | 1 helpful votes


I could not locate a Whirlpool manual, but found the contact information for you to speak to Whirlpool and request assistance.

https://www.whirlpool.com/services/contact-us.html


Contact Us Save time by checking your appliance information before contacting us. Manuals and Literature
You can also visit our Product Help Page for troubleshooting tips.
Questions or comments? Here are a few easy ways to reach us.

By Phone

US: 1-866-698-2538
Canada: 1-800-807-6777
Hour of Operation:
Monday-Friday: 8:00 AM to 8:00 PM EST
Saturday: 8:00 AM to 4:30 PM EST
Please locate the appliance's model and serial number before calling.
Need help finding your model and serial number?

Chat

Hour of Operation:
Monday-Friday: 8:00 AM to 8:00 PM EST
Saturday: 8:00 AM to 4:30 PM EST
Launch live chat

By Mail

Whirlpool Customer Service
553 Benson Road
Benton Harbor, MI 49022

Refrigerators | 164 views | 1 helpful votes


The model # is actually MFI and not MF1. The part for the bypass plug will be 12664501SP. Most people do not know what it is when they get their new fridge and throw it in a junk drawer! Look around as you probably have it somewhere.

Refrigerators | 197 views | 1 helpful votes


suspect it needs freon added and if not equipped with the fitting then only a pro can do it

Refrigerators | 414 views | 1 helpful votes


I assume that you mean that the refrigerator compartment is not getting cold enough. After checking that the setting is turned up for the refrigerator, see if there is air flow when you push the door button to a closed position. You may hear the fan running, unless the unit is not running to begin with at that time.

Refrigerators | 182 views | 1 helpful votes


Check the back of the freezer is see if there is ice or frost on the back wall. This would indicate it not defrosting causing the problem. The other thing to check is if the fan in the freezer is coming on.

Refrigerators | 801 views | 0 helpful votes


P1 is usually the code for a temperature probe error - the refrigeration should now operate on a time cycle until the temp probe is replaced

Refrigerators | 54 views | 1 helpful votes


Without knowing your model# to know which fridge you have makes it difficult to tell you how to do this. Most models have the lower frame supporting the pan and it is not easily removed. It is also very possible to damage the pan if not done correctly so I normally never recommend someone do this! Once it crack, you need to replace it!

Refrigerators | 50 views | 0 helpful votes


THERE IS NO SET TEMP FOR EITHER ON OF OFF BUT WHAT YOU SET IT TO BE WITH THE DIAL OR NUMBER SETTINGS

Refrigerators | 76 views | 0 helpful votes

Not finding what you are looking for?
Jet Tech Systems Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top Jet Tech Systems Refrigerators Experts

Marvin
Marvin

Level 3 Expert

84625 Answers

Brad Brown

Level 3 Expert

18060 Answers

Gil Shultz

Level 3 Expert

3388 Answers

Are you a Jet Tech Systems Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...