I need assembly instructions for the Da Vinci Lauren crib
Million Dollar Baby not have the instruction manuals directly available for the DaVinci labeled cribs.
Here is the contact information for DaVinci customer Service:
http://www.davincidecor.com/contact/new
Here is the page to sign up to order replacement parts for DaVinci cribs.:
http://www.davincidecor.com/user_session/new
I heard there was a recall on model
was wonding about a crib i have and need it may have been recalled what should i do with it its a Doral Asia sr4 modal# DA0504KMC-1N
1/4/2010 11:26:04 PM •
JCPenney...
•
348 views • 0 helpful votes
Missing eyepiece for D=60mm, F=700mm. Lot
Measure the hole in the telescope.
Eyepieces come in .965, 1.25, and 2 inch sizes.
The hole is either .965 or 1.25 inch most likely.
Many on-line retailers sell eyepieces. Here are two:
http://www.agenaastro.com/
http://www.astronomics.com/main/Telescopes_and_Telescope_Accessories.asp/catalog_name/Astronomics/category_name/Home
Hello: Watch stops , will not work unless
Most watch company's offer a 2 year warranty on the movement and it sounds like a problem with the movement. I recommend taking it back to the point of purchase with reciept if they can't look it up and most company's will remedy the problem at no cost to you (when it is that new).
Converting crib to bed- no manual
the 800 number for the company is 1-800-295-1980
and their
email address is
[email protected]I have the same crib and got the info from the manual, hope this helps!
The model number is DA0504KMC-1W for the white one and DA0504KMC-1N for the natural color one.
8/14/2009 1:32:29 AM •
JCPenney...
•
439 views • 0 helpful votes
Round Crib plastic replacemnet part
i have the same problem, i went to home depot to purchase the piece and they don't have it.
they told me that i'll need to purchase a new crib :S
can you resolve your problem?
How do you set the time for a ladies Armitron
Thanks for your question!
I'm sorry that you haven't received an answer yet.
The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...
Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.
Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.
Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!
If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question
8/31/2009 10:43:04 PM •
JCPenney...
•
122 views • 0 helpful votes
I need to convert my Dorel Asia SRL DA0504KMC-1W
Dorel customer service number is 1-800-544-1108 or 1-800-295-1980(asia model). Depending on your model number. Then can e-mail you directions. Very easy and I had them by the time I hung up the phone.
6/14/2009 4:31:40 PM •
JCPenney...
•
986 views • 5 helpful votes
How to assemble my Jardine Crib, model: dv623BC.
To get a hold of Jardine Enterprise Ltd for anything to do with their cribs call 1-800-295-1980. They do not have a website and you
may be on hold for a little bit, but the person who helped me was
great.
Need to remove winder on mens seiko titanium so i can remove the
Ensure crown is in neutral position i.e. pressed home (not in set hands posn.) Remove back and adjacent to the winding stem on the movement there should be a small button (may be indicated with an arrow) depress this gently whilst withdrawing the crown and stem from the watch. Ensure you don't engage to set hands position in the process. You might also find a couple of screws securing the movement into the case. P.S. Usually don't need to remove from case to replace battery.
DECADE WATCH HAS NO SETTINGS MANUAL
If your Decade watch is like mine it has 4 push buttons (10, 2, 4 and 8
"o'clock" positions respectively; and one pull and turn stem (at 3
o'clock position) -
For the purpose of setting the watch and functions mentally label the push buttons as follows:
10 o'clock position "A"
8 o'clock position "B"
2 o'clock position "C"
4 o'clock position "D"
NORMAL TIME SETTING
1) In normal time readout press B (3x) to get to normal time setting
mode: "SEC" will start flashing, press C for synchronization
2) Press D once: "MIN" will be flashing, press C to advance
3) Press D once: "HOUR" will be flashing, press C to advance ("A" is for am, "P" is for pm, "H" is for 24 Hour format)
4) Press D once: "DATE" should be flashing, press C to advance
5) Press D once: "MONTH" should be flashing, press C to advance
6) Press D once: "DAY OF WEEK" should be flashing, press C to advance
7) Press B once: Setting is completed, return to normal time readout
ALARM TIMES SETTING
1) In normal time readout press B (2x): Alarm time "HOUR" should be flashing, press C to advance
2) Press D once: Alarm time "MIN" should be flashing, press C to advance
3) Press B once: Setting is completed, return to normal time readout
ALARM FUNCTION
1) In normal time readout press C and D simultaneously: Alarm signal should appear
2) In normal time readout disarm alarm by pressing C and D simultaneously: alarm signal should disappear
Note: Alarm (when activated) will stop itself after 1 minute; or can be silenced by pressing D or press C to snooze for 5 minutes (operates for 1 hour)
CHIME
1) In normal time readout press D and B simultaneously: Chime signal should appear
2) In normal time readout disarm chime by pressing C and D simultaneously: alarm signal should disappear
CHRONOGRAPH (STOP WATCH FUNCTION)
1) In normal time readout press B once to get into "CHRONO"
mode: press C for to start counting event -
While in Chrono mode there are two options
a) During a counting event: press C to stop counting, press D to clear and reset stopwatch to 0:00
b) During a counting event: press D to see a "split" time (IE first leg of a relay time is shown while the counting event continues, press D again to return to running counting event; press C at end of event, press D to reset stopwatch to 0:00
2) press B to return to normal time mode
Armitron Pro Sport Watch Hourly Chime
Based on insructions for another watch, I just figured this one out. The steps would be:
Get in Alarm mode (press mode button)
Then you can cycle through the following by pressing the ST/STP button
1. Alarm on
2. Chiime on
3. Alarm and Chime on
4. Alarm and Chime off
You can see this with a magnifying glass and watch the center and right hand circular icons at the top of the display.get highlighted.
12/26/2008 8:34:30 PM •
JCPenney...
•
13,201 views • 27 helpful votes
Can't set day of the week for armitron MD06117 mens watch
Purchased my Armitron men's digtal watch in 2009.
Here's the twist on setting the name of the Day of the Week on my watch. When you get to the name of the Day of the Week flashing.. you don't get Su...Mo...Tu... You get 01..02..03... up through 99. (You think.. what the hell is this??) DON'T TRY TO SET Sun.. Mon.. etc here.. you won't find it. The puzzle solver..and it is.. IS TO SET THE LAST TWO DIGITS OF THE YEAR HERE.. Example... it is now 2010.. so scroll thru the numbers and set it to "10"!! Now.. when you go and set the numerical day date e.g. 3 for March, and set the numerical day - e.g. 15, the on-board computer?? in the watch will AUTOMATICALLY SET THE NAME OF THE WEEK!! It will look-up For Example.. in the year 2010.. 3-14 is SUN.. and will set it as that!! Hope this saves you some frustration.
Regards...
[email protected] (Mar 14, 2010)
3/6/2009 3:53:23 PM •
JCPenney...
•
1,481 views • 1 helpful votes
Unable to set day/date/year &time
Follow this link and download instructions for your watch:
http://www.armitron.com/watch_instructions.asp
Do not forget to rate, please.
3/11/2009 9:37:18 PM •
JCPenney...
•
1,198 views • 2 helpful votes
Not finding what you are looking for?