JCPenney Logo

JCPenney Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 69 Products
  • 252 Answers
  • 55K Views

I finally found my instructions!! It's actually really easy to convert to a toddler bed:
Step one: Take out four screws (two on each side) of the front railing and top bar. They are the screws holding the front railing and the top bar to the side of the crib and the dresser. 
Step two: Lower the mattress to the lowest setting. 
Step three: Place the toddler bed railing in place. It can go either way depending on which side of the crib your toddler sleeps. We put the taller part of the toddler railing closest to the dresser because that is where our son's head usually is. 
Step four: You'll need 4 1.5 inch hexagonal screws to screw in the toddler railing. After 2.5 years, I could only find two of them, so I used two 1.5 inch regular screws that came with the crib. On the taller part of the toddler railing -- the screws go into the 1st and the fifth holes. On the shorter side of the railing, the screws go into the 3rd and the 5th holes. 
That's it.. You've now got a toddler bed!

JCPenney... | Answered on Jul 04, 2018


Fixya does not sell Savannah Morgan crib hardware.

JCPenney Baby... | Answered on Mar 03, 2018


Hello, Supermodel4 -

Do all of the remaining screws for the crib seem the same? If so, take one of the screws with you to your local hardware store or home improvement store and ask a sales clerk at the store to help you find more screws the size of the one you have.

Note: I find the best help at my local (smaller) hardware store.

If it seems that the crib requires several different screw sizes, you may have to take the relevant crib parts with you so you can obtain help in identifying the right size screws.

Note: If you disassemble the crib later on, I recommend you put all the small parts, including the screws in a zipper lock plastic bag and use duct tape or strong package tape and secure the plastic bag to larger crib parts.

JCPenney... | Answered on Jan 06, 2018


Look at the April 2017 list of 138 that were slated for closure by July 31st only a few are left to close by sept JCPenney is closing 138 stores see if your store is one of them

JCPenney Baby... | Answered on Aug 28, 2017


this should work with your aspen watch let me know if it doesn't

http://dive.scubadiving.com/members/gearreviews.php?s=593

Quote

For the alarm: If you want to use it (I think both it and the light use battery faster than when not used), you set it by pushing mode button twice, as indicated above, then go to hour or minute setting by pushing the lap/reset button, and advance to the time you want by pressing the start/stop button. Pushing mode will take you back to normal time again.

To turn alarm on or off, hold lap/reset button in and at the same time push the start/stop button. Alarm icon will show on or off. When you release the lap/reset button, it will revert to normal time.

If the alarm is on, at the designated time it will start beeping for awhile or until the lap/reset button is pushed (off) or start/stop button (snooze).

JCPenney... | Answered on Dec 14, 2016


1-800-933-7115
This is the number for replacement parts for furniture at jcpenney. i ordered new harware for my caden convertible crib

JCPenney... | Answered on Aug 21, 2016


http://www.worldofsportwatch.com/en/product-3315.html
This is a link to a website that has OTS watches on it. Click on the OTS watch you have and there is a manual selection. The instructions are a bit hazy but basically you have to press the mode button 3 times, the reset button to get to what you want to change, and then the start button as many times as needed to change it to what you want. I finally corrected my watch time and date using it. Thankfully!

JCPenney... | Answered on Jun 27, 2016


Look online for a manual. Searching "Propel Gyropter Manual" Should bring up at least a pdf manual.

Chaio!

JCPenney... | Answered on Nov 29, 2015


Based on insructions for another watch, I just figured this one out. The steps would be:
Get in Alarm mode (press mode button)
Then you can cycle through the following by pressing the ST/STP button
1. Alarm on
2. Chiime on
3. Alarm and Chime on
4. Alarm and Chime off
You can see this with a magnifying glass and watch the center and right hand circular icons at the top of the display.get highlighted.

JCPenney... | Answered on Sep 23, 2015

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top JCPenney Experts

Arturs Kalnins
Arturs Kalnins

Level 3 Expert

2338 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Tom Chichester

Level 3 Expert

50997 Answers

Are you a JCPenney Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...