JCPenney Answered Questions & Fixed Issues

I am in need of the assembly instructions. Do u still have them?

notify jcpenney

I had this bed giving to me missing hardware is there a place I can but it so baby could use the bed

Hello, Supermodel4 - Do all of the remaining screws for the crib seem the same? If so, take one of the screws with you to your local hardware store or home improvement store and ask a sales clerk at the store to help you find more screws the size of the one you have. Note: I find the best help at my local (smaller) hardware store. If it seems that the crib requires several different screw sizes, you may have to take the relevant crib parts with you so you can obtain help in identifying the right size screws. Note: If you disassemble the crib later on, I recommend you put all the small parts, including the screws in a zipper lock plastic bag and use duct tape or strong package tape and secure the plastic bag to larger crib parts.

Look at the April 2017 list of 138 that were slated for closure by July 31st only a few are left to close by sept JCPenney is closing 138 stores see if your store is one of them

1-800-933-7115
This is the number for replacement parts for furniture at jcpenney. i ordered new harware for my caden convertible crib

did you charge it that might be the problem

there might be hair or fur stuck in your parts check that out

Hi make sure you are on correct channel. Usually there are A B C channels. Look on your heli and try each one :)

To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops. Type in the "brand name" of your device, in the search box [at the top right] of the display window to get gathered all the related posts to this brand devices. It will make surf easy.

http://www.ehow.com/how_8010606_baby-crib-model-3438200-instructions.html

The drive gear is either not engaged no or has stripped teeth.

Replacement parts can be found on amazon, take a look: Amazon com Gyropter RC parts. I hope this was helpful. cheers

Found this : Can you help with this Cribs Cradles Bassinets question posted on FixYa

1. Take out four screws (two on each side) of the front railing and top bar. They are the screws holding the front railing and the top bar to the side of the crib and the dresser.
2. Lower the mattress to the lowest setting.
3. Place the toddler bed railing in place. It can go either way depending on which side of the crib your toddler sleeps. We put the taller part of the toddler railing closest to the dresser because that is where our son's head usually is.
4. You'll need 4 1.5 inch hexagonal screws to screw in the toddler railing. After 2.5 years, I could only find two of them, so I used two 1.5 inch regular screws that came with the crib. On the taller part of the toddler railing -- the screws go into the 1st and the fifth holes. On the shorter side of the railing, the screws go into the 3rd and the 5th holes.

If this doesn't help you can try contacting the store you bought it from.

I charged my gyropter ,and the bottom propeller spins slowly and makes a noise.

No.

Glue it back on.

Sounds like the battery is not charged fully. Mine did that after I pulled it out of the box. Let it charge for a while longer. Chaio!

Look online for a manual. Searching "Propel Gyropter Manual" Should bring up at least a pdf manual. Chaio!

The Jcpenney ones seem to have the most problem with this. Some of the gears might be out together wrong, see if Jcpenney will take it back. Chaio!