Craftsman Popular Questions, Answers, Tips & Manuals

0.025in. (0.635 mm)

failing battery --trigger switch fail --damaged wire

POSTED TO CARS/TRUCKS MOVED YAH TO WILD GUESS ME, The Craftsman T1200 two-wheel drive lawn tractor was manufactured by MTD built from 2015 to 2020. The components of Craftsman T1200 powerline system: 25.6 cubic inches (420 cc) Zongshen 4P90HU 4-cycle single cylinder 2-valve vertical shaft air-cooled gasoline engine and mechanical CVT transmission with infinite forward and reverse gears. The engine has a float carburetor, splash lubrication system, and electronic ignition system. The maximum travel speed (forward/reverse): 5.5 mph (8.8 km/h) and 2.3 mph (3.7 km/h).

Question edited for clarity. It is shown here https://www.justanswer.com/small-engine/bhlet-tried-repair-ignition-craftsman-zero-turn.html https://www.google.com/search?q=craftsman+247.25001+wiring+diagram ..

check vent--if has fuel filter change it --carb cleaning --rebuilt--replace --------cdi failing

Question edited for clarity. Help in the link, but basically you follow the lever and linkages and tighten them up. https://www.google.com/search?q=craftsman+t-100+transmission+lever+loose Here are all the parts in a schematic diagram

T 100 (CMXGRAM201302) (13AC77XY093) - Craftsman ...

PartsTree https://www.partstree.com > models > t-100-cmxgram... Repair parts and diagrams for T 100 (CMXGRAM201302) (13AC77XY093) - Craftsman Lawn Tractor (2021) ....

It could be due to: Fuel restriction Low engine compression / worn engine components Worn spark plug Plugged air filter

Question edited for clarity. Question moved from Misc to correct category. By 'stride wire', do you mean just short across the switch? Yes you can but really you need to fix the problem. You know these things can blow up and spray shrapnel 30 feet? Google Craftsman (model) parts You may have a short in the motor, in which case, shorting it out won't fix it. https://www.google.com/search?q=Craftsman+Air+Compressor.+I+have+to+press+the+reset+button+on+it

See owners manual. Free download at https://www.searspartsdirect.com/manual/223e1lwylt-000247/craftsman-917275820-front-engine-lawn-tractor-parts

You can find a copy of the owner's manual for your Craftsman riding lawn mower model 917.287130 on the Sears Parts Direct website. Here are the steps to find and download the manual:

1. Go to the Sears Parts Direct website at www.searspartsdirect.com.
2. Click on the "Manuals" tab at the top of the page.
3. In the "Search for Manuals" box, enter "917.287130" and click "Search".
4. Click on the "View Manual" button next to the "Owner's Manual" option.
5. You can now view the manual online or download it as a PDF by clicking on the "Download" button.

Note that you may need a PDF viewer, such as Adobe Acrobat Reader, to view the manual. If you have any issues downloading or viewing the manual, you can contact Sears Parts Direct customer service for assistance.

no car told, makers,model, year. not one tiny clue told just a code# that code ,decodes to this 917294560 Craftsman Tiller so is not a car at all. it is a garden tool. answer buy the shop manual for it. pay ,

Yes of course as long as the battery is removed.

If your Craftsman 320.48247 laser level is not working with new batteries, there could be a few different issues causing the problem. Here are a few things you can try to troubleshoot the issue:

1. Check the battery connections: Make sure the batteries are properly installed and the connections are clean and secure. If the batteries are not making good contact with the terminals, it can cause the laser level to malfunction.
2. Check the battery type: Make sure you are using the correct type of batteries for your laser level. Using the wrong type of batteries can cause the laser level to malfunction.
3. Check the laser diode: If the laser diode is damaged or not functioning properly, it can cause the laser level to malfunction. You can check the laser diode by inspecting it for any visible damage or looseness and making sure it is properly aligned.
4. Check the lens: If the lens is dirty or damaged, it can cause the laser level to malfunction. Clean the lens with a soft, dry cloth and make sure it is not damaged or cracked.
5. Check for any other visible issues: Inspect the laser level and its components for any visible issues that may be causing the laser level to malfunction. This can include debris or foreign objects that may have gotten stuck in the laser level, or damage to the laser level or its components.

If you have tried these troubleshooting steps and the problem persists, it may be necessary to have the laser level serviced by a professional. A technician will be able to diagnose the problem and determine the necessary repairs.

The manual bypass valve lever on a Craftsman 247.288852 lawn tractor with an MTD 918-04566 fluid drive transmission is typically located on the rear of the transmission, near the pulley. You may need to remove the rear cover to access it. Look for a small lever or knob that can be turned or pulled to disengage the transmission and allow you to move the tractor manually. If you're having trouble locating the manual bypass valve lever, you may want to consult your owner's manual or contact the manufacturer or a qualified technician for assistance. They should be able to provide you with more specific information and guidance on how to locate and operate the manual bypass valve lever.

all the parts and diagrams are in the links https://www.google.com/search?q=craftsman+model+c950-52677+parts ..

yes, once you have removed batteries. Good luck unit is most likely damaged from battery leakage.

Removing bearing #30571 on a Craftsman Radial Arm saw model 113.29003 can be a bit challenging, but it can be done with the right tools and techniques. Here are the steps you can take to remove the bearing:

1. Unplug the saw from the power source.
2. Use a wrench or pliers to loosen and remove the bolt or nut that holds the bearing in place.
3. Carefully remove the bearing from the saw. If it is difficult to remove, you may need to use a bearing puller.
4. Clean the bearing and the area around it with a clean rag or brush.
5. Inspect the bearing for any damage or wear. If it is damaged or worn, it will need to be replaced.
6. Once the bearing is removed, cleaned, and inspected, install the new bearing if needed, and reattach the bolt or nut to hold it in place.
7. Before turning the saw back on, make sure to test the saw operation before using it.

It is important to mention that this is a general guide, the exact steps and tools may vary depending on the particular model, so you may want to consult your saw's manual or the manufacturer for more specific instructions. Also, be aware that working with any power tools can be dangerous, always use the appropriate safety gear and take caution.

Question moved from Cars and Trucks category. Here is the manual, but there is no wiring schematic in it. If the company is still in business, the contact details are on the last page. I would wire it direct so it only turns towards the tool rest. https://images.homedepot-static.com/catalog/pdfimages/4a/4a69d367-a64f-4a5b-ac48-5c74d9d697b7.pdf https://www.google.com/search?q=General+International+Maxi+VS%2B+wood+lathe+wiring+schematic ..

Question edited for a lot more clarity. Question moved from Televisions category. Contact some of the companies in the link. You may be able to get the old one repaired if it is truly obsolete.. https://www.google.com/search?q=craftsman+hbw1127+remote+replacement ..