Kitchen Ranges - Page 3 - Popular Questions, Answers, Tips & Manuals
My tappan gas range 316071600 timer wont stop beeping?
Press the "Timer" button on your Tappan gas range 316071600 to turn off the timer.
If that doesn't work, try pressing and holding the "Timer" button for 5-10 seconds.
If neither of these steps work, try unplugging the range from the power outlet for a few minutes and then plugging it back in.
If none of these steps work, it's possible that there is a problem with the timer itself. In that case, you may need to contact a professional repair service to diagnose and fix the issue.
My oven says f2 error on my stove what does that mean
F2 indicates thermistor has short-circuited therefore not operational. It does not necessarily imply the thermistor is at fault. The wiring harness might be at cause. A qualified service technician will need to have a look, determine faulty part then replace or repair it.
Bosch HGI8054UC warming drawer won't close completely
The slides require replacing.The functions part on the rear of either the right or left side has failed causing your drawer not to close. It cannot lock so the spring pushes it out. The part on the rear that locks it in, and ejects it out some how gets damaged. Need a T 20 star/torque bit to replace. The part number for the slides is 12024638. You can pull out the drawer but be careful of the rail that will stick out. Don't let the drawer land on your feet. If you don't order the parts yourself and install this, you may call the Bosch service to do such for you --though you have noted the expense.
What do I need to do my stove exploded? Hot glass every where help?
You will need to get an appliance engineer in and fit a new glass door panel.
Glass in not a warranty item as it breals if stressed.
If you contact the manufacturer firstly, they might send an engineer to check the door and if the door is warped, replace it free of charge, if you speak to them explaining how dissapointed you are etc.
My Smeg gas oven lights up when I press the knob to light but as soon as I release the knob the flame dies?
Question edited for clarity.
The thermocouple safely device needs replacing. It's job is to make sure there is a good pilot flame before opening the main burner valve. When they fail, the flame goes out. You can try holding the knob longer, or just call for service and have it replaced. It is a gas appliance so should only be worked on by a gas certified technician. It is a fast job, in and out in 30 minutes, so call out plus the part.
..
Stove ignitor does not light burner. How to fix ?
This may sound silly and I know your stove is gas, but is your stove plugged into a power outlet on the wall? Some older stoves had the igniters powered from a wall socket so had to be 'plugged in' and others are powered by replaceable batteries, (AA's or AAA's), with the pack being mounted low down on the front, near one of the front feet. If it is a battery type try changing the battery for a new one. Sometimes the fix is that easy.
Not finding what you are looking for?