Kitchen Ranges - Popular Questions, Answers, Tips & Manuals


PERHAPS IT NEEDS CLEANED GAS BURNERS DO NOT IKE BEING WATER LOGGED

Belling Kitchen... | 40 views | 1 helpful votes


Some have thermal fuses and some don’t. Need model #

Kenmore Kitchen... | 43 views | 0 helpful votes


no I do not KNOW . ask the MANUFACTURER

Kitchen Ranges | 28 views | 0 helpful votes


My best guess is it needs a new igniter harness, Though it could be the igniter module. Resistance testing of the igniter switches on the igniter harness would tell you which. Part # PE070818

igniter harness-uqrmmcyrqtywlqhcc1pxjbp1-1-0.png

Viking Kitchen... | 83 views | 1 helpful votes


The F3 error code indicates an open circuit at the oven temperature sensor. Usually this means that the temperature sensor has to be replaced. Infrequently, the problem is with the wiring between the sensor and the electronic control board or the control board itself. You should check the continuity of the wiring and across the temperature sensor and for problems in the wiring harness connections before ordering the replacement parts. The manufacturer's recommendations are to replace the temperature sensor first. If the error code recurs, then you replace the control board.

Your range's model number is probably RS385PXBQ0. Most Whirlpool models end with a number. There are several sources for the parts diagram and price list. The temperature sensor is part 23 on the oven body diagram. One diagram is here https://www.searspartsdirect.com/model-number/RS385PXBQ0/1198/0124100.html . Another source is https://www.partselect.com/Models/RS385PXBQ0/Sections/OVEN-BODY/?ModelID=765297&ModelNum=RS385PXBQ0&mfgModelNum=&ManufactureID=3&Selected=P0ICVYKN&Position=4&mfg=Whirlpool&Type=Range&Mark=4 .

If you look for the control board, it's part 19 in the Main Top diagram at the above sites. The control board is no longer sold by Whirlpool. If it's faulty, the recommendation is to send it to a repair shop for a rebuild. Replacing the range is a better solution if the temperature sensor and wiring are not faulty.

I hope this helps.

Cindy Wells

Whirlpool... | 32 views | 1 helpful votes


It be just the bulb that needs to be re new

Broan-NuTone... | 101 views | 0 helpful votes


The fan light switch blinks when it is time to clean the filter. Clean the filter, then press and hold the switch for 3 seconds to reset it.

Zephyr Savona... | 65 views | 0 helpful votes


CALL A LOCAL REPAIR SERVICE THEY CAN TEST IT , WE CAN NOT SORRY

DCS Kitchen... | 24 views | 0 helpful votes


H2SO4, a rag soaked in it and a battery charger. Chemistry will remove the discoloured marks.

Stainless... | 46 views | 0 helpful votes

Not finding what you are looking for?
Kitchen Ranges Logo

52,045 questions posted

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Craig Butler
Craig Butler

Level 3 Expert

1730 Answers

Marvin
Marvin

Level 3 Expert

84027 Answers

Paul Carew

Level 3 Expert

3416 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...