Acer TravelMate - Popular Questions, Answers, Tips & Manuals
Sir,,i hav an acer TM5720
Go into the device manager and remove the camera. Then scan for hardware changes. It will find the camera and load the required drivers. If, for some reason, it finds the camera but not the drivers, go to the Acer webpage for your laptop and download the drivers. When you install them, just point to that file.
Semper Fi,
Z
No Audio/Sound????
backup your files and restore to factory settings.
https://www.youtube.com/watch?v=xbDj7AQdQw4
Laptop keyboard not working
Usually in my experience most laptop keyboards are disposable. I have 2 suggestions for you.
1. buy a new same brand keyboard.
2. remove the flex connector, then use an external usb keyboard, or a bluetooth wireless keyboard.
hope it helps your problem.
My wireless network card needs a new driver?
I have actually experienced this before and surprisingly, it turned out to be a hardware fault with my built-in wireless device. I had to resort eventually to one of those USB plug-in wifi dongles. They cost less than ten bucks, and if you don't need the range, come in "nano" sizes that protrude less than half an inch when installed. Do disable the internal wifi device, either in device manager or better still, in the bios if using this solution.
I have an ACER Aspire
YOUR LAPTOP HAS A MISSING BOOT DEVICE THIS USUALLY MEANS YOUR INTERNAL HARD DRIVE HAS DIED
Acer wont power on
If the computer doesn't power on what-so-ever, it may be your power ribbon. I have the same issue with my Dell Inspiron 15.
The power ribbon on your motherboard connects to the power button on your laptop which obviously turns on your computer.
That may have been damaged. I suggest taking apart your computer and trying to find out the issue from the inside. (Or, if you don't know how turn it in to a technician.)
My Acer Travelmate 4100 is
If nothing is happening with a good battery or a good power adapter you have a serious issue. Could be bad mo bo, corrupt cmos, bad hard drive, bad peripheral, .
Remove drive and plug into another known working computer as slave and see if it works and perform diagnostics on it. If it checks out at least you have your files and data . But the rest of the unit ................................
When I plug in my
as you say you have not tried a different battery or power supply then may be thats what you need to do just to make sure thats not what it could be.
Not finding what you are looking for?