Error code 6202 - Computers & Internet

Code 6202 To Reset. Disconnect from power source wait 2 minutes and reconnect. This should work. I believe it is a modem problem. Your manual should cover this. Contact Kodak for further problems Most issues are correctable by the user and the user should first consult the user/operators manual.

This error occurs when you enter an invalid or incorrect serial number for activation

http://support.en.kodak.com/app/answers/detail/a_id/1247/selected/true

http://support.en.kodak.co.za/app/answers/detail/a_id/24922/selected/true

Thank you for contacting FixYa printer support. Error: "Printer error" (6202) Published 08/25/2010 11:38 AM ' Updated 05/20/2011 09:04 AM ' Answer ID 1247

How do I resolve the error message "Printer error" (error code 6202)?
To resolve this error:

1. Disconnect the power adapter from the printer.
2. Wait 30 seconds to allow the printer to reset.
3. Connect the power adapter to the printer. Turn the printer on if necessary.

When the printer is ready (no error message), upgrade the firmware for your printer:

1. Locate and select the firmware for your printer.
2. Follow the instructions to install the firmware.

If the error continues and you cannot upgrade the firmware, contact Kodak Technical Support.

Hope this helps helps. Please keep us updated and remember to rate this answer.

TF

the solution is to change the catridge of the machine.

To resolve this error:

1. Disconnect the power adapter from the printer.
2. Wait 30 seconds to allow the printer to reset.
3. Connect the power adapter to the printer. Turn the printer on if necessary.

When the printer is ready (no error message), upgrade the firmware.

If the error continues and you cannot upgrade the firmware, contact us.

To quote Shockwave727:

{ ...
6202 error code means that the scanner motor failed

to solve this

-Open the printer access door of your printer
-Unplug power cable
-then after 30secs plug the power able back
-If the printer is already power-up the message printer access door will appear
-Close th printer access door
-try to scan or print

If this issue not solve call tech support of kodak Toll free 1 800 421 6699

... }

6202 error code means that the scanner motor failed

to solve this

-Open the printer access door of your printer
-Unplug power cable
-then after 30secs plug the power able back
-If the printer is already power-up the message printer access door will appear
-Close th printer access door
-try to scan or print

If this issue not solve call tech support of kodak Toll free 1 800 421 6699
-

Hi!

This is a error message of the scanner.
1. Turn printer on.
2. Unplug ac adapter.
3. wait 1 minute.
4. Plug ac adapter in printer.
5. wait until the printer is ready.

when the error still occurs, the printer is definetly defect.