Instruction on how to scan on canon mp460

If you only scan your photo to your printer no need to used inks for that...just click the scan icon witch located in your pc...thanks

You can download the manual from the manufacturer's web site at
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp460#BrochuresAndManuals

my canon mp460 will not scan

hey
place the document in scanner feeder
hen go to control pannel
select the scanner and camera wizard
click on canon scanner
click next and scan the document

go to the following link and download the users manual, printer driver, and printer specs.
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=238&modelid=13369

Here is the driver page, just select your OS:

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=334&modelid=13369

Click on this link follow the instructions and download the driver.hope this helps

Click here to download the step-by-step instructions and the user manual.

All you need to do is go into Navigator and select photo/document, this will take you to a screen where you can select photo/document etc. Then select resolution (the higher the dpi the better the quality, but slows down scanning). Follow the instructions. When scan is complete a small picture will appear, and a dialogue box asking if you wish to scan again, if you do put a new document on the cover and press scan. If it doesn't look right ignore the picture and rescan. When done exit at the dialogue box. The small pictures can be selected and edited or turned around using the icons. You can save one image at a time just by selecting the image and not the others. If you want to make a PDF, then select the images in the order you want the pages to appear in and save as a PDF.

Hi!
Unfortunately I can't mail you instructions, mine is a Mp600, however if you visit www.canon.com look for their help/support pages pop your machines details in and Bingo you can print them off direct.
Can't do better than that?
Press the Blue button please when sorted from my FREE effort!
Thank You!
Paul 'W'

are you pressing ok on the printer? all of your scanning should be done via the MP460 navigator. check your applications under the Canon Utlitiy and click on the MP460 Navigator button. scanning needs to be done via that - not the actual printer. refer to the dialogue box when you are on the MP460 navigator. lower left area has a Save bar, when you click on it tow options: save to PC or save as PDF.