Want to attend your IVP. When is the next one coming up? I am coming from the USA

To turn off the auto attendant:

Press the program key. The display will indicate:

PLEASE SELECT
PNON ANSW OTHER

Press the key under ANSW. The display will indicate:

AUTO ATTND: ON
BACK CHANGE NEXT

Press the key under CHANGE. The display will indicate:

AUTO ATTND:OFF
BACK CHANGE NEXT

That's it. Now press the program key to finish. If you need more detailed instructions, please follow the user manual: Nortel pdf manual

Please specify the fault seen on the machine. thank you.

Log into voice mail with password and go to AA/Lines and tell each line to use the same Table #.

Hi, this will be a great oppourtunity and am happy to receive this invitation and i will be glad to come along with my team for this wonderful presentation.
But the little problem about this to be frank with you is that we are from Nigeria and you know how difficult it is to get a Visa to the USA. If you are ready to assist in getting this Visa for me and my 4 colleagues, we will definitely honour the invitation and any other one you need us to attend..
You can reach me on my cell +2348023236760..
Hope to hear from you soon..

Take care

That one doesn't sound too good.
You could perform a reset through programming which should clear the scratch pad.
Thats done by entering programming on either ext. 10 or 11
Press feature 00 then the left hand intercom twice.
Next enter # 728, the display should say reset save all then reboot the system.If the problem is still there, then the processor is malfunctioning and will need to be replaced.

To enter viocemail administration, press Feature 983. if your system has 2 digit intercom #s your password is 120000 if your system has 3 digit intercom #s your password is 1020000. once you have entered the password you will see 3 selections you can make .use the three soft keys under the display and select AA (auto Attendant). next press greeting and greeting again. next it'll ask for the greeting number your probably working with greeting 1. press record to start and ok when finished. dont forget to save the greeting or it will be deleted if you exit early. hang up when finished

feature 982 password:67372867, press next til you see answer lines:y, change to n, press release

Try this:

DX-80 Time Change Instructions

Software Revision F32 and later

From the attendant station or an phone with attendant password:

1. Press Feature #0 from the telephone dialpad. You will be prompted to enter the Tenant Group

number. This is typically 1, however it can be set for Tenant Group 1-3.

2. Press Save and enter in the attendant password (default is 9999), then press Show.

3. Press the Next option until the display prompts you for the System Time. Press Show.

4. The last 2 digits of the year will be displayed. If you do not need to change the year, press Next. If

you need to change this value, press Chg, enter in two digits for the year and press Save then Next.

5. The current month setting will be displayed. If you do not need to change the month, press Next. If

you need to change this value, press Chg to cycle through the 12 months. When you reach the

appropriate setting, press Next.

6. The display will show the currently programmed day of the month. If you do not need to change the

date, press Next. If you need to change this value, press Chg, enter in two digits for the date and

press Save then Next.

7. The day of the week (Sat - Sun) will now be displayed. If you do not need to change the day, press

Next. If you need to change this value, press Chg to cycle through the days of the week. When you

reach the appropriate setting, press Next.

8. The current hour will be displayed. Press Chg and enter in two digits for the hour in military format.

Press Save and Next.

9. The display will now show the programmed minutes. If you do not need to change the minutes,

press Next. If you need to change this value, press Chg and enter in two digits for the minutes (01-

59). Press Save then Next.

10. You will be returned to the top level off System Time. To exit Attendant Administration, pres

On/Off button twice.

Software Revision F2x

From any telephone:

1. Press Feature # * and enter in your password. (Default password ########).

2. Press Show and enter 08 14.

3. Press Save then Show.

4. The option to change the Year will appear. If you do not need to change the year, press Next. If

you need to change this value, press Chg, enter in two digits for the year and press Save then Next.

5. The option to change the Month will appear. If you do not need to change the month, press Next. If

you need to change this value, press Chg, enter in two digits for the month and press Save then

Next.

6. The option to change the Day will appear. If you do not need to change the date, press Next. If you

need to change this value, press Chg, enter in two digits for the date and press Save then Next.

Printed in the USA Page 2 of 2

7. The option to change the Weekday will appear. If you do not need to change the weekday, press

Next. If you need to change this value, press Chg, to select the weekday, and press Next.

8. The option to change the Hour will appear. Press Chg and enter in two digits for the hour in

military format. Press Save then Next.

9. The option to change the Minutes will appear. Press Chg and enter in two digits for the minutes and

press Save.
10. Press the On/Off button to take the phone out of programming mode.

sears.com parts may have it at a low cost///just tell them make and model!

I was poking around on the web and found your question. I designed the SI-460 a few years back. Casio, sadly, shut down their phone division.

I can e-mail you the owners manual (PDF) if you need it.Anyway, in case you haven't figured it out:

To turn off the auto attendant:

Press the PROGRAM key.

the display will indicate:

PLEASE SELECT
PNON ANSW OTHER

Press the key under ANSW

The display will indicate:

AUTO ATTND: ON
BACK CHANGE NEXT

Press the key under CHANGE

The display will indicate:

AUTO ATTND:OFF
BACK CHANGE NEXT

Press the program key to end the process.

Good Luck.

Joseph Quevedo
[email protected]