Hello The pump SRMW2.2g26 it is the same as the SRMV2.2.g 26 I would like to know if it fits in ths same machine

Hi,
Temperature gauge is often fitted to the radiator. If the thermostat is stuck the rad won't have any water going through it and temperature gauge will not give true indication of temperature.
You should be able to remove thermostat and run engine without it in pace ( just to test ).
An old way of testing if a thermostat is working was to immerse it in a bowl of boiling water. You should be able to see the thermostat open and then close as it cools down. If it doesn't chances are it's for the bin.
My money would be on the thermostat being fault. It's certainly easier to check than dismantling the pump. Hope this helps
Regards Stan

Check your pump . make shore water is pumping out of drain hose fast/ if not clean objects in pump or pump impeller is broken? replace pump.

Just trade the car for one you like. First of all, I don't know anything about the hybrid system, but I think you would be facing a modifier's nightmare. Just think, all the wiring, all the computers on the car, are designed for this hybrid. If you put in a gas engine (one from a '98 Camry, I would think), you would need that engine harness, that computer, likely several modifications to electrical connectors, you may need a different fuel pump,different relays and switches...to me, the necessary modifications seem endless, and pointless...just trade it off!

fit a universal pump from any refrigeration parts shop and you will need to set the flow rate

Hello Jiggitytiggi,

Empire is able to ship you a pump for your machine. Ask for Kris when you call. (877-855-4540)

some toyotas have the fule pump in the gas tank if it dus you need to remove the tank and the sending unit it ths raund thing on top of the tank the pump is in side you can remove the ring with a flat screw drive and a hamer. have fun

washing machine dances allover the floor when on spin cycle

HI,

Please remove the mem.card and format it in your Laptop or PC(if you have a card reader).This will fix the issue.

Let me know the result.

see if theres not something clogging the pump on ht e machine

if hte machine is either a whirlpool or a kenmore sounds as if you have a bad motor coupling ( ths machines equivelent to a belt)