Can I increase the volume on my Jabra Steel - Jabra Radio Communications

I just got mine and had the same problem. After messing with it for a bit I got it to work. The trick is you must have audio of some kind playing through the jabra when using the volume button. I started some music playing and then tried the button and it worked. But if it is idle you just get the battery status.

I just got mine and had the same problem. After messing with it for I bit I got it to work. The trick is you must have audio of some kind playing through the jabra when using the volume button. I started some music playing and then tried the button and it worked. But if it is idle you just get the battery status.

MY JABRA CONNECTS BUT I HAVE NO VOLUME I HAVE A
T-MOBILE PHONE. I RESET THE JABRA I TURN UP THE VOLUME ON MY PHONE NOTHING

Hi,
Sorry you cannot increase the input.May be there is more disturbances in the surroundings.Try to speak more louder.Thats it you can do.
Thank you

Some devices could be defective but the odds with Jabra along defectiveness are in 1/900!

Try to increase the volume from your phone! if that doesn't work... the product could be defective!

What cellular device do you carry!?

MY JABRA CONNECTS BUT NO VOLUME TRIED TURNING UP PHONE TRIED RESETTING JABRA ALSO

All that means is to put your radio on FM 88.1, and just wait. Jabra will find the exact frequency (mine is 88.7) and then it will work. When you want to use it to listen to music, just put the radio on 88.1 .

You don't need one. After charging set, press and hold for several seconds until unit blinks repeatedly. Now it's on.
To turn it off, repeat procedure.
Press briefly to take incoming calls, or to place calls if your phone is voice activated. You should hear a beep after each press.
Use + and - buttons to increase/decrease volume.
Unit blinks once, intermittently, when it's ON. That is normal operation.
Note: It takes a few seconds for the connection to occur, after you initiate a call or take a call, and other sounds alert you when the connection is taking place. You'll learn as you go.
Good luck!

from the manual at http://www.jabra.com/sites/Jabra/GNimages/Products/WirelessHeadset/BT350/Documents/BT350_UM_NA_EN_491.pdf

Call vibrate*
• Call vibrate is automatically activated when you turn on your headset.
• To disable the call vibrate feature, press the answer/end button and
press the volume down (-) button at the same time.
• To reactivate the call vibrate feature, press the answer/end button and
press the volume up (+) button at the same time.

DO AS THAY SAID HERE.......Press power button and the - and + volume buttons at the same time AND THEN WHEN THE BLUE LIGHT STOPS ON !!!!! GO TO YR PHONE AND SEARCH FOR THE HEADSET WHEN U HAVE FOUND IT ON YR MOBILE TIPE .........0000...... then you will be sorted
hope this helps c ya