No volume on my korg electribe drum box - Korg Music

See page 166 troubleshooting of user manual. It may help.

331ad6cf40f982ddcfbb201db1a6d34f.pdf (korg.com)

Often as a not a simple volume pedal will suffice, available as a stand alone item or a feature of an effect pedal like the Boss ME-25

It's about hardwares.
Wiring connection sockets is loose.
Inside the korg PA50,Wiring connection to the keyboard is separate to left and right.
Open/disassemble your korg.
Look for connection cable to the left keyboard.
One end is on the keyboard,the other end is at the mainboard.
Unplug both of it, then mounted again.
For master volume,better buy new one.

The card that you used to transfer the files HAS to be (1) FORMATTED by the ESX-1 unit FIRST, (2) then put the card into your computer's card reader and download the files. (3) Put the card BACK into the ESX-1 and try reloading the factory presets. Good luck!

• Power Supply should be checked first by a multimeter

then the ESX will follow.


other option:

• Borrow a working power supply adaptor one from a friend,

just to determine if it is the ESX , the power supply or

both ( I just hope not )


Once determined , you can either repair or replace

the AC/AC power supply


Let us know how it goes

Go to the court website, select your product, and download the drivers.

Try this:http://www.korg.com/Support.aspx Hope this helps.

They need to be downloaded from korg.com. You need to have a floppy disk drive to load them unfortunately.

Make sure the SR16 is set to send the clock out. Read 6.6 of your user's manual.

Thanks For Using Fixya A Direct Download Is Here.
Enjoy And Thanks Again.
Sincerely,
Michael Scott