American Audio Music - Recent Questions, Troubleshooting & Support
American audio vms4 fuse
Try using a 6v power supply, sounds like you are not getting enough power. The nwer models are 6v now and I believe the 5v was always under powered.
Cdg not playing disk
Can you hear the disk spinning? If not, the motor may need replacement.If it is spinning- is it on Pause? If it is spinning and not on pause, the laser my be burned out, or the flat ribbon connector may be dislodged.
Hi! I can not open
If the unit is still within warranty, then it should be returned for repair by the manufacturer. If not, and you are handy with a screwdriver, then you may be able to fix it yourself.
Although I am not familiar with this precise model, in my experience most units of this type are based on standard optical drives, just like in a PC. If you remove the front panel of the unit, you should be able to find the emergency release hole: a small hole just wide enough to push a straightened paper clip into, which should release the drawer.
Hope this helps.
Appears that the 3.5MM input
to do that you'd actually have to disassemble the unit. ( start by removeing scews on the bottom ) and dropping out the pc boards that hold the jack or are in the way of the pcb with the jack on it. at which you'd just have to un-solder old jack and install replacement and reassemble and your done. you cann call american audio to find distributers of their parts.
Not finding what you are looking for?