Need connect HP Officejet 7210 printer into wifi domestic network

RJ 45 (Ethernet) Cable should work.
Otherwise you can try connecting it to the WiFi Network.

Sir/Madam

iOS: Troubleshooting Wi-Fi networks and connections Symptoms This Issue is Related To Your apple Mobile And Make Sure You Already Install HP Printer Software In Your Desktop or Laptop. If yes I suggest you perform below Solution for Your Apple 5s and HP Priter Connectivity Issue:

Learn how to troubleshoot WiFi.Issues you may encounter while using your iPhone, iPad, or iPod touch.

Resolution Occasionally while using your iOS device, you may notice unexpected Wi-Fi behavior: Difficulty locating or connecting to a network
Unexpected Wi-Fi signal strength or disconnects
Inability to access the Internet
Not automatically connecting to WiFi when expected
Follow these steps to troubleshoot the above issues:
1.Be sure you're in range of your Wi-Fi router (access point).
2.TapSettings WiFiand turn WiFi off and on. If your Wi-Fi setting is dimmed,follow these steps.
1.Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
2.Restart your iOS device.
3.Tap Settings WiFi and locate the WiFi network to which you're connected.
4.Tap and Forget this Network.
5.Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
6.Turn your Wi-Fi router off and on. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
7.Update your deviceto the latest version of software.
8.Update your Wi-Fi router to the latest firmware. For AirPort Base Stations,install updates using the AirPort Utility.

If the issue is still unresolved Follow the steps below for the issue you're experiencing.
Collapse All'Expand All

Unable to locate a Wi-Fi network

Unable to connect to a Wi-Fi network

WiFi disconnects or signal strength is less than expected

Unable to access the Internet while connected to Wi-Fi

Unable to automatically connect to Wi-Fi

Additional Information Find information onconnecting to a Wi-Fi network.
Some third-party routers may not be compatible with all iOS devices, even after updating to the latest firmware. If your iOS devices can successfully connect to other Wi-Fi networks, contact your router's manufacturer to ensure that your router is compatible with your iOS device.
See recommended settings forconfiguring your Wi-Fi router for use with iOS devices.

Notes
1.iOS devices sold in China may use the term Wireless LAN (WLAN) instead of Wi-Fi. Not all China iPhone models supportWLAN.
2.If needed, please consult with your network administrator (which may be your Internet Service Provider) for assistance with this step.
3.iPhone 5, iPad devices, and iPod touch (5th generation) are the only iOS devices that can connect to 5 GHz networks.

If You Still Haveing Problem then Visit official Below Apple Website URL Link:
http://support.apple.com/kb/ts1398

Or

In case you still having HP Printer Issue Then Follow Us On:


HP Printer Support

One is a guest. It still requires a password.

First try rebooting the router to see if it "see' the kindle. Make certain use are using the correct network password/key - it is case sensitive. Does the Kindle connect to other WiFi networks? If not the Kindle may be the issue

The ultimate answer is a factory reset of the router.

hello I insetall drive printer hp laserjet 3050 **** remov memoery printer hardwaer and no ready and unknow USB port


tankyou

Hello,

You could probably log into the router interface and chnage the wireless settings and re-name the network. This might work.

Hope this helped.

hi tohafaniwang
the HP OFFICEJET 5610 doesn't have an internal wireless adaptor therefore you would not be able to connect it wirelessly to your wifi network. Although there is an option to get a wireless LAN routher/printserver wherein you would connect the printer to the wifi print server/router using the usb 2.0 cable. using this you would be able to setup that all that connects to your wifi network would be able to print to your printer.

Hope this helps
janc30

What is the Operating system on the laptop ?
If it is XP then in the bottom right hand corner you will find Wireless network connection ( looks like 1 computer monitor). Use that icon to connect to the wireless network.
If it is windows Vista, then in the bottom right hand corner you will find 2 computer monitor icon. Use that icon to connect to the wireless network.
If it is Windows 98/ME/2000 then use the adapter utility to connect to the wireless network.
For MAC you will see the AIRPORT icon at the top.

Check the wireless settings of the router first . Make sure that yopu have all the wireless settings of the router. If you are not sure about the settings, then open the router set up and check the settings.

Click Here for step by step instructions on how to connect to the wireless network and troubleshooting steps

Try connecting your printer directly to the wifi router/switch in a shared network configuration. Then go to your router settings, find the local ip address add this as the 'host'. Your settings should be as follows:


Driver : HP Mobile Printing
Bearer: Socket/HP Jetdirect
Access Piont: My Home Wifi (kaba)
Host : ip address of you printer
user : Blank ( tried my windows username,no use)
port : 9100
Printer Model: Officejet Printers

You will have to reconfigure your drivers on your pc as well. Mine installed as a wireless shared printer even though the printer is not wireless but I have it connected to my wifi switch for sharing and it worked fine.

Good luck
Damien_1977

hi

firstly check to see if the wireless is set for wireless access based on MAC address filtering

also check to see if both the laptop and the wifi router are communicating on the same channel