My gas range has ncal in the screen - Frigidaire FEF336BC Electric Kitchen Range

Hello -

The Ncal error code on your LG gas range may mean there was damage to the oven control board, which is electrical. There could have been damage to the wiring.

Personal opinion: Contact an authorized LG gas range repair center and arrange for a repair technician to come and take a look at your stove.

Best wishes.

This usually indicates an electronic oven control board failure. It could also indicate a failure of the sensor probe, one of the elements, or the wiring. Try turning off the power for a while, 10 minutes or longer. If the problem persists when power is reapplied and none of the keys respond, you need to unplug the range (or shut off the power at the circuit breaker). Then usually you need to replace the oven control board and overlay. If you post the full model number of your range, I may be able to check for the appropriate replacement part.

I hope this helps. Kenmore appliances with 790 were manufactured by Whirlpool.

Cindy Wells

Could be the control panel

I have one for sale, it was stored next to our range for a few years but never been used reply to make an offer plus shipping from (Tustin, CA.) [email protected]

You range would seem to be in self clean mode. Simply switch that off and your range should work

Try pressing and holding the "Oven" button for 5 seconds.

local gas companies will sometimes offer to see what the problem is with gas appliances and outlets in your home. If this is a gas type, call your local gas company and have an agent come take a look.

I AM GETTING A F7 CODE ON THE DISPLAY SCREEN ON MY GAS KENMORE RANGE. THE RANGE WAS INSTALLED A BRICK WALL NOT ABLE TO GET TO THE MODEL NUMBER UNLESS REMOVED BY AN PROFESSIONAL.

The PF means there was a power failure, you should be able to clear this code by pressing the cancel button

I got an e mail saying that there was a solution - have you seen it?