I have an old KV-27FS16 which started to have problems powering up. Eventually it didn't power up at all and blinked 4 times in a loop.
Since it is old I took a look inside. What I read so far points to aD-board problem. After a while I forgot that I took the D-board outand I power it up and it did. I connected an antenna and I can seechannels.
What is the function of the D-board? Do I really need it?
Thanks,
Opy
Thats great you got that page.
4 blinks error shows problem in vertical deflection.
D board is some what related to vertical and I hope error will be fix after replacing / repairing D board.
D board part number is ...
A-1343-875-A
and available in Part Store.
×
963 views
Usually answered in minutes!
I don't know what Dynamic Convergence does.
Could you give me an example of the error?
Never Mind...
I found a web page with a great explanation about Dynamic Convergence:
http://books.google.com.pr/books?id=_YEJ...
Ok,
Yesterday I tried to see the difference and I noticed it.
So, now I would like to find a new/used working D-board if possible.
Where can I get one?
If I replace the D-board, will that solve the 4 blinking issue?
any suggestions on where to find the D-board?
That link takes me to a power supply???
The part number that my D-board has is 1-678-307-12 and 171857212.
I also see A-1343-876-A with an "ink type of stamp" 875 on the side of the board.
And I remember it been called "D board is for Dynamic Convergence"
Just double checking since I don't want to buy the wrong thing....
Thanks
D board is for Dynamic Convergence in KV-27FS16
without D board TV will work but you will notice some error in convergence.
Below is an image of D board pcb...
×