20 Most Recent Sony KDL-32S3000 32 in. LCD Television Questions & Answers


SIX Blinks
---
No Horizontal (H STOP), no raster, goes to the blinking self
-
diagnosis function immediately. Check C515
& 516 and the jungle IC, IC206.

Sony KDL-32S3000... | Answered on Jul 24, 2017


actually tv is not full hd & not sported play station signals through HDMI

Sony KDL-32S3000... | Answered on May 08, 2016


Just talked with Sony Support today.

It seems that Sony in Denmark had sent out new software updates (over DVB-T) but also some wrong TV's got updated as well. This caused my DVB-T tuner to not function anymore so I wanted to try a factory reset and it fixed my problem.

So I was instructed on how to do this. I have a Sony Bravia KDL-32P3000 (which should be similar to the U3000 and S3000 as well).

This is how to do a factory reset of your Sony Bravia KDL-32 P/U/S-3000 TV.

PLEASE BE VERY CAREFUL WITH THE SERVICE MENU, YOU CAN EASILY CAUSE YOUR TV TO MAL-FUNCTION!!!! IF YOU FOLLOW THIS GUIDE IT IS AT YOUR OWN RISK!!!

Set your TV in standy (use the green power butten on your remote), RED standby LED is ON on your TV.

Now press these buttons in this order on your remote (pointing to the TV).
i+
5
VOL UP (+)
GREEN POWER button

NOW BE CAREFUL! Dont press any keys just for the fun of it!!! IT MAY DESTROY YOUR TV.
You should now be in the service menu. It will show up as some green letter/numbers spread over the screen (mine are a bit hard to see/a bit faded). In the upper right corner you should have 2 letters TT (two t's).

Now carefully press key 0 and then key 8 on your remote (they should be shown on the screen after the two TT).

Now wait a little while (more than 10 seconds) and your TV should reset with factory settings, just as if you had just brought it home from the TV store.

Best wishes,
Mads

Sony KDL-32S3000... | Answered on Apr 13, 2016


  1. Turn on the TV.
  2. Wait approximately 40 seconds for the TV to completely start up.
  3. On the TV remote control, press and hold the UP ARROW button

Sony KDL-32S3000... | Answered on Nov 18, 2015


make a new HDMI errors which is in main board .

Sony KDL-32S3000... | Answered on Sep 30, 2015


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
Some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement.

Sony KDL-32S3000... | Answered on Sep 01, 2015


check 5v regulator on cont board

Sony KDL-32S3000... | Answered on Mar 16, 2014


Fuse is on power board near AC input connector. you needto open the back cover for this.

Sony KDL-32S3000... | Answered on Nov 24, 2013

Not finding what you are looking for?
Sony KDL-32S3000 32 in. LCD Television Logo

83 questions posted

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76099 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

KDL Sony

  • KDL Sony

Most Popular Question

power tv click back stand

  • Televison & Video
Loading...