I just purchased this treadmill. The internet was working on it. I needed to upgrade the firmware; but it wasn't allowing me to do so. I then moved the positioning of the treadmill. I still have a good signal strength for my wifi network but it won't connect. Please help. I have rebooted the android and it still gives me the same issues. Thank you. Hope you can help. Angela

Sounds like a software issue. Call nordictrack at 888-308-9616

The ISP is correct in telling you not owner upgradeable. Only because the upgrade is their property. The firmware is coded for their cable lines to distribute the power levels through the cable. If you're having intermittent disconnects, you should call them and ask for a LEVEL3 tech to come to check the cable connections from the "TAP" (which is where the cable comes to home), it's possibly needed to rewire the cable and splitters in your home

I think you can try upgrading the firmware on your router,

Connect the computer to the router.
Download the latest firmware.
Open the setup page of the router and upgrade the firmware.
After upgrading the firmware, reset the router and reconfigure it manually.

See How to upgrade firmware on Linksys router.

Watch video: Linksys router setup

Wireless routers contain built-in programmable logic called firmware. The firmware is embedded software that implements network and security protocols for that specific model of hardware device.Every wireless router ships with a tested version of firmware provided by the manufacturer. However, most routers are also designed to support a firmware upgrade process. This allows the manufacturer to provide enhancements to routers already sold. Manufacturers generally provide firmware upgrades as free downloads from their Web site.

Additionally, a few manufacturers (like Linksys) provide their firmware as open source code on the Internet. Programmers worldwide are free to modify and extend the code with new features for their routers. Several versions of this hacked firmware can be found on the Web, but the average homeowner should avoid these types of firmware.
The Firmware Update Process
You begin a firmware upgrade by downloading a binary file package from the manufacturer's Web site. After the package is set up properly on a PC, an administrator can launch the actual upgrade from the wireless router's administrative console. The router will stop functioning if the upgrade fails to complete. For this reason, manufacturers generally recommend an Ethernet cable be run from the router to the PC to ensure maximum stability during the update. Consult the router's product documentation for details.
Immediately after purchasing a router, check the firmware version to ensure it is the latest version. Firmware can be installed on a router at the factory several months before the router is sold.
Then, check the manufacturer's Web site occasionally over time for any new firmware upgrade postings. Each time a firmware upgrade is posted, the manufacturer will provide notes detailing the enhancements it provides. Feel free to skip an upgrade if the new version does not offer any interesting features. However, if a router is performing sluggishly, freezing unexpectedly or experiencing dropped connections, firmware upgrade often supplies a quick fix.

All routers -- the device you use to access the Internet -- use a type of software called firmware. Not only does firmware allow your router to provide you with Internet access, firmware also provides the graphical user interface (GUI) you use to communicate with your router. Whether it's because your router manufacturer has updated the firmware software or because your router is starting to malfunction, sometimes you need to reinstall your router's firmware.
1. Insert the Ethernet cable into your router and your computer. You can access your router through your computer's wireless card; however, since you are reinstalling your firmware, it's possible your signal may get interrupted. It's best to ensure you have a secure, consistent, uninterrupted connection.2.Turn on your computer. Launch your web browser. Navigate to your router's manufacturer's URL.3.Locate the update button at your router's manufacturer's website. You can locate this portion of the website by entering or selecting your router's make and model number or name into a search box or through a link. You may also locate this section by clicking a "Downloads" or "Service" button on the website.4.Click the "Download" button or link once you have found the appropriate download for your router's specific make and model number. You will usually be prompted by a dialog box to "Save File." Click "OK." You will be asked where you want to save the firmware on your computer. For easy access, save the firmware on your desktop. Allow your computer to download the firmware to your computer.5.Enter your router's IP address into your browser's window. This is usually either 192.168.1.1 or 192.168.0.1. Your Internet service provider should have given this information to you. Enter your username and password into the appropriate fields.6.Look for an "Advanced," "Router Upgrade" or "Maintenance" pane. On this pane, there will be an area with a window and a "Browse" button. Click the "Browse" button and select the file you downloaded in Step 4. Allow the router to communicate with your computer and access the new firmware. If presented with an "Upgrade" button or option, select it. You may be asked if you want to upgrade your firmware. Select "Yes" or "OK." The router will upload and reinstall the firmware.I hope this will help you,mhonjosie

You do not list the model # of this tv. The problem however might be resolved with a firmware upgrade. http://www.samsung.com/us/ click on the su[pport link then type in your model number. This site may have a firmware upgrade available for your tv.

Step I: Download the latest version of Samsung Kies from official site of Samsung Kies. The latest version of Kies is: Kies_2.0.0.11044.

OR

You can download it from here: Samsung Kies Download Link

Step II: Open Samsung Kies and connect your Samsung Wave with PC (Wait for driver installation, if you have attached your phone for the first time with your pc)

As soon as Kies will detect your phone it will offer a prompt of new firmware update available, see the screenshot below


Firmware upgrade prompt

Click on UPDATE button

Step III: Now you will face a window of 'Agree to the Terms and Conditions." You can choose the option of save and don't save the information. This option is that, Samsung will store your information of IP and hardware specifications on their servers for 2 years. It is totally dependent on you, which you want to choose.

We would like to recommended you to choose "Allow saving"


Upgrade Terms & Conditions

Hit START UPGRADE button

Step IV: It is strongly recommended not to disconnect your phone from PC until the upgrading process is complete. So take care of it.

Within few minutes (depends upon the speed of your internet connection). Upgrading process will move on and will complete successfully.


Upgrade in Progress

Note: Don't use any options on your phone, while the upgrading process is taking place, your phone will be restarted. DON'T PANIC!

Your phone will come to working state automatically and your Samsung Wave is successfully upgraded to Bada 1.2

you must look for the firmware/upgrade for it on a sat. website i would have thought where you purchased it would have a site that allows you to upgrade the latest firmware

Hi,

This is a well known bug of Nokia 5320.Nokia have resolved this issue.This bug will not allow you to install .jar files mainly..But it will allow
.sis files which have correct certification.


Nokia 5320 has 3.0 to 4.0+ firmware is available in the market.
You have to press +#0000# and check the firmware version
Even though your firmware is of 4.0+ try to upgrade it again.Because of the corruption in the phone...

Steps how to upgrade it.
1)Connect Nokia with USB cable provided during the time of purchase of the phone.
2)Install Nokia PC suite that is also given during the purchase of the phone in a CD.PC suite can be downloaded in the internet in nokia official website for free.
3)Open Nokia Software Updater through PC Suite interface.
4)Your internet should be On.Nokia updater will download it automatically and upgrade your phone version.
5)Follow the step by step instruction of Nokia Software Updater.

Note:Do not disconnect the phone while its updating....


Please do rate the solution if the issue is resolved or post a comment for further assistance.