Nordic Track Exercise & Fitness - Recent Questions, Troubleshooting & Support


I had the same problem with my Nordic track. I pressed every button until I found the one that did not beep. The one that does not beep is stuck. My problem was with the Ifit button. The first few times I would push the bad button until it started beeping. That worked for awhile (couple of weeks but started up again). I disconnected the Ifit unit and now the thing work fine except for Ifit which I never used. Nordic track wanted to sell me a new console which cost more than the machine.

Nordic Track... | Answered 3 days ago


Did you ever figure out an answer to this? Mine is doing the same thing

Nordic Track... | Answered on Sep 02, 2019


In normal operation you put in the key and display should light up. Also there is a reset switch on the frame near the power chord which might be off. Below is link to the User Manual for NordicTrack x7i. I got that info on pg 16.

http://www.sportsmith.net/images/product_support%5CNordicTrack%5C248194%20-%20NORDICTRACK%20INCLN%20TRAINER%20X7I%20INTERA%20TREADMILL%5CNTL20909.3-299073.pdf

Nordic Track... | Answered on Sep 01, 2019


Dear Sir:

Thank by your request, I hope everything is o.k
I will try to help you, inmediately.

1)
Pedal Arms
1
Use aflat screwdriver to unseat the tabs that hold the front top cover in place. Thiswill expose the flywheel and pedal arm connection points. Rotate the flywheelby hand and determine whether lubrication will accomplish the repairs. If thebearings are exposed, use a grease gun with an extension nozzle and lubricateboth bearings with lithium grease. If the bearings are damaged or sealed,proceed to the next step.2
Removethe front and side covers on the main frame. Hold the flywheel with one handand use a box wrench to loosen the bolts that secure the pedal arms at eachside of the flywheel. Pull the arms away from the flywheel and remove thebearings from each side.3
Test thebearings as before. Lubricate exposed bearings with lithium grease andreinstall them. Sealed bearings must be replaced. Reattach the pedal arms tothe flywheel. Replace the main frame covers and front top cover to complete therepairs.
If you need further assistance, please reach me.

Thank you in advance, sincerely. God bless you.

E.CUADDRA
MANAGUA, NICARAGUA. C.A

Nordic Track... | Answered on Aug 22, 2019


You have to turn off the power switch at the front of the treadmill near the power cord.

Nordic Track... | Answered on Jul 03, 2019


Hello

The servo motor which changes the resistance (under the plastic covers) is winding the cable in the wrong direction. Release tension on the cable by pulling the magnets away from the fly wheel and flip the cable off the the servo motor pulley, this will allow the cable to be pulled in the correct direction.

Nordic Track... | Answered on May 19, 2019


Controller . I aman authourised repairer for the brand in Australia .

Nordic Track... | Answered on Apr 28, 2019


Try resetting the router.

Nordic Track... | Answered on Apr 25, 2019


Try spraying silicone spray under the belt. It worked on mine. You can buy spray cans from a Hardware or Bunnings etc.

Nordic Track... | Answered on Apr 07, 2019

Not finding what you are looking for?
Nordic Track Logo

2,154 questions posted

Ask a Question

Usually answered in minutes!

Top Nordic Track Exercise & Fitness Experts

Ross Metcalfe
Ross Metcalfe

Level 2 Expert

135 Answers

Treadmill Repairs...
Treadmill Repairs...

Level 2 Expert

338 Answers

Android Man
Android Man

Level 2 Expert

278 Answers

Are you a Nordic Track Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...