I plug in my printer, and all the lights keep flashing, and there is no message on the screen. What can I do? Thank you!

Just reset the printer by pressing the power button 5-8 seconds until it turns off.

Turn it on again, and it should work. But, if it won't, check whether there are any error messages that appears on the screen. Let me know by leaving a comment in this thread.

Thank you for using fixya.

try reinstalling the printer driver again

It can also indicate you have messages on your SIM that are not yet copied to your phone.

Go to messages -> Options -> SIM Messages and delete or copy these messages and the blinking icon should dissapear.

Please un and re install the device drivers following link
Installing Devices on PCs and Laptops

Hello ,

Please follow the below steps to try and clear this message.

1. Turn the power off on the unit.
2. Open the front and back cover of the unit.
3. Remove the drum and toner cartridge from the unit.
4. Check thoroughly inside for any paper jams or any other foreign objects and remove them.
5. Reinsert the drum and toner and close the front and back cover.
6. Turn the unit back on.

If the light keeps flashing you will want to check to see if you need to feed paper through the manual feed.

The manual feed is the opening on the front of the printer, just place a page there.

This should clear the error message on the display screen and allow you to resume normal use of the printer.

Thanks,

Pat

I removed the black ink cartridge that was REFILLED at a popular retail outfit and replaced it with a remanufactured one I bought on the web. As soon as I closed the lid, the flashing stopped and it has been working GREAT ever since. Many postings had already recommended the changing to a "new cartridge" to remedy this flashing lights and "pen failure."

#9 will actually delete the firmware on your printer from the sounds of it you unfortunately fried the hardware
try doing a #6 but never do a#9

You need to count the number of flashes, usually long green then a certain number of flashes, sometimes alternating red and green flashes. I need to know the number of flashes to tell you what the error is.

hi,clean any sensor & clear any hide misfeed sheet.send me result.
thank you.

When the orange light is flashing, either paper jam or ink problem is happening.Try unloaging & reloading the stack of paper in the main tray. Remove & reinsert ink cartridges in the printer. You may also clean the contacts of the cartridge and inside the product.