20 Most Recent
HP OfficeJet D135 All-In-One InkJet Printer - Page 2 Questions & Answers
I keep getting the message
Usually this message comes from office, you need to put the office CD in the CD rom drive, than the system will copy the missing file and the message will stop poping up.
My HP d135 printer will
Hi,
This is normal operation. IT does this if an error occurred during the printing operation.
HP D135 Wont Print IN COLOR!
Dacy, Go into the printer properties and check and see if it is set to print in grayscale.
Please let me know!!!
thanks
Just put 2 new ink cartridges in my printer -
Hi
Just remove the new 2 cartridges and rub the print head in a plain paper with isopropyl alcohol until ink flows, and then return the ink cartridges and run the print nozzle for 2-3 times. After that, try to print again.
Please let me know if you need more help.
Hey. I have a HP
Go into Device Manager and double click on USB Print Support.
In Driver tab, click uninstall.
After uninstall, power reset the computer.
Once computer turns back on, it should automatically start the re-installation process of the printer.
Then you select let windows do automatic search for the proper driver.
I have an hp officejet
Your printer has a print head under the ink cartridges. You can try a cleaning, and if this does not fix the issue, you may need to replace the print head .
Clean Printheads function
To activate the
Clean Printheads function from the front panel:
-
From the front panel, press MENU.
-
Press the RIGHT or LEFT ARROW until Status and Maintenance displays.
-
Press ENTER
-
Press the RIGHT or LEFT ARROW until Clean Printheads displays.
-
Press ENTER
After a few minutes the HP Officejet D series will automatically complete the printhead cleaning operation.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Thanks, Joe
I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309
After a paper jam I
Hello.
That strip is the encoder strip. Wipe it gently with a Q-tip before replacing it. Place it behind the carriage and hook on either side. Move the carriage if necessary. Close the cover and the printer should reset itself.
Hope this resolves your problem.
I'm trying to scan a document into Word and keep
Hey JD!
It
probably means that the scanner isn't configured well in the computer.
What you should do, while to printer is turned on and connected to the
computer is to go to the device manger (right click on "my computer" or
"computer", and then go to the tab named "device manager"). go to
"universal series bus controllers" and press on the plus sign. you
should then have a list, search for "USB composite device" in that list.
when you find it, right click on it and then left click on "uninstall"
or "remove", approve it (press yes or OK) and after it done, disconnect
the usb cable that connects the computer to the printer and restart the
computer. only after the computer is booted up completely, you should
reconnect the cable. after you do that you should get a pop up that says
that new hardware is being installed (or something like that). wait for
it to finish and after it says "you new hardware is installed and
ready" (should appear near you computer clock), try to scan, it should
work fine now. Good luck!
Is it just the printheads?? or could it be something else?
Hi There
Ok try tois first.
Summary
Usage of compatible ink and leave the printer idle too long may cause printhead clogging
What should you do if you get this problem. Relax; you may recover the printhead by unclogging it. Follow these steps to unclog the printhead
1. Right click in the printer driver name
2. Select Properties menu
3. Click Maintenance tab
4. Click on cleaning sign for regular cleaning. Perform this up to 3 times.
5. If this does not work, perform Deep Cleaning
And if that not work
Some times it needs a good clean up but this is up to you if you want to do this,
But after you done this prime the printer so it gets the inks back in the heads, it may take a little time for the inks to work.
Ok.
There is fluid cleaner for this but I can never find any in the shops the only ones I seen is when they sell them in Tesco but they come in with the ink refill bottles so I just use worm water by it self on a cloth and dabbing on the heads to clean them, it will not harm the heads but not to much water.
Some heads are on the inks them self but some have them inside the printer so I not know your printer so if the heads are inside you need to get them out you may find that some heads will just clip out put some need to be unscrewed so you got to know how they come out so be careful and not push to hard on them, if the heads are on the ink then it is a easy job to clean them,
It worth a try it worked for me more than ones.
Please all I ask is call back and just gave a vote, it will gave me some satisfaction to know am helping some one, so I will keep on helping.
All The Best: Pineworks
After printer is on for
Hi,
Solution one: Check the scanner light
- Follow these steps to check the scanner light by making a color copy of any document.
- Load plain white, unused, letter size paper in the paper tray.
- Lift the scanner lid, place the original face down on the scanner glass, and then lower the scanner lid.
- Make a color copy.
- When the product starts to scan the document to copy, slightly lift the scanner lid to see if the scanner light turns on. It is not necessary to lift the lid completely.
The scanner light should be visible under the scanner glass to the right or left.
Solution two: Check the power connectionFollow these steps to troubleshoot the power connection.
- Press the Power button to turn off the product.
- Unplug the product power cord from any surge protector, extension cord, or power strip, and then connect the power cord directly to a wall outlet.
- Press the Power button to turn on the product.
- Load plain white, unused, letter size paper in the paper tray.
- Lift the scanner lid, place the original face down on the scanner glass, and then lower the scanner lid.
- Try again to make a color copy.
- Press the Power button to turn off the product, disconnect the power cord from the wall outlet, and then reconnect the power cord to a different wall outlet.
- Press the Power button to turn on the product.
Try again to make a color copy.If these steps resolved the issue , you do not need to continue troubleshooting.If the issue persists we have to reset the printer. Doing reset in the beginning stage is not recommended. Reply me back and i will provide the reset step instruction.
Regards
Riztech
I have a d145 officejet
In this printer the actual printing head is separated from the cartridge. This message tells you that the processor of the printer has detected a malfunction with the actual printing head and it has labeled as damaged and in need of replacement. You can find a new one here
http://www.amazon.com/Original-HP-Printhead-Retail-Packaging/dp/B000060K5D
I am trying to determine what printer cart. I need
Hi,
You have purchased the HP Officejet D135 All-in-One printer. Click on the link below to open the HP website to place order for the cartridges.
This printer uses HP 14 Black ($25.99) and HP 14 Tri-color ($35.99) and the Combo pack of Black/Color is $55.99.
www.Hpshopping.comHope this was helpful.
Thank you for contacting FixYa
*Rating and comments are invited on this solution
Wont print
I use a clear silicone tube to carefully prime the carts by sucking a
dab of ink out of the tiny print holes before installation. I am
careful to have a tight seal at the holes to prevent getting too much
ink and possibly getting it in my mouth.
Not finding what you are looking for?