20 Most Recent HP OfficeJet D135 All-In-One InkJet Printer - Page 3 Questions & Answers

hello, waste/ capping assembly is broken, i ahve tried many ways to repair without replacing, but found the best repair was to replace waste/capping station.

You can try this work around on your all in one printer, follow these steps.

1. Remove the cmos battery. How to:

2. Plugged the power supply into a power strip that has a switch to turn off power. Reason: So you'll be able to turn off the power from the power strip instead of unplugging the power supply from the wall all the time.

3. Disable ink level checking for both black and color. To do this, when you turn on the power from the printer. It should say Initializing. When it's done and it says the date. Press the left and right arrows at the same time. Then press the numbers 456. It should then ask you a Yes or No question. Press the number that says Yes. Then you'll press the two arrow keys again and this time you'll press numbers 789. A Yes or No question will appear and again you'll press the number that corresponds with Yes.

Sometimes this procedure doesn't work and you'll be required to remove the power supply from behind the printer. Once unplugged, wait 30 seconds before plugging it back in.

Have you tried the steps on this page?
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00787271&cc=us&lc=en&dlc=en&product=64986

Please ensure that there is no objects in the paper feeding area. Open up the printer and see if there is any debris or items which may be effecting the heads. Check the ribbon cables and rod on which the ink slides for obstructions. Is there an error code that posts?

Good Luck,

NOLA Tech

if the unit was stored with an old cartrige then over time it would have leaked ink there fore clogging up the injection points they will need to be gently using a ear but with hot water flushed until the points are all free from glug


best of luck

The scanner is not able to calibrate. It can be a few things. Either the scanner lamp has reached the end of it's life and can not output sufficient light, the first surface mirrors in the scanner head are dirty (blocking sufficient light), or the calibration strip is dirty. That machine is what I would call decent. I would prefer it over a brand new model because it holds a substantial amount of ink. I would attempt to repair it, but would suggest taking it to a qualified shop, ask them about the problem and see if they can suggest any of these as possibilities before giving them the work.

No !!! First of all they are not the same size so the black cartridge most probably won't fit on the color slot, and if for any reason you need to print more with it, the black ink would have left its "mark" inside the color ink the injectors.

what do you mean with uninstalled it self?
If the pc see the the printer and you dont have driver go to HP suite and download driver
if the PC didn't see the printer check the data cable

You must have both black and color cartridges in the working condition. They don't have to be full but must show dome ink. Steven 818-888-0006

On the top of the scanner mechanism, there is a black tab that gets caught on the underside of the scanner surface, just beyond the glass, towards you. You will hear a gear grinding sound, that"s the tab getting caught and the motor skipping on the belt. either bend the tab down, or remove it. Its on the black cover that"s on top of the scanner mechanism. Also remove any tape that is on the bottom of the trailing cable under the scanner mechanism that prevents it from moving all the way to the left.This worked for me, It drove me nuts till I found out.

Scanner, put your scanner settings to "Skip preview and send directly to photo view center". If I set this option then I don't get the error. Its only when I use preview and then accept that I get the error. It may be that the usb port sends the data too fast or the data to tell the scanner to crop is corrupted in the scanner memory and the only way to clear it is to turn on and off. What if you sent the accept function through a network card that plugs into the back of the scanner, does it still get corrupted? Or what happens if you use an older slower usb port to send the data. I did everything, clean the glass, change battery. But this is the only thing that worked. Respond and tell me what happens with your printer. Thanks.

Since this is an inkjet machine, there should be a way to force the printer to go through a self cleaning which should clear the print head of any blockage.

On the top of the scanner mechanism, there is a black tab that gets caught on the underside of the scanner surface, just beyond the glass, towards you. You will hear a gear grinding sound, that"s the tab getting caught. either bend the tab down, or remove it. Its on the black cover that"s on top of the scanner mechanism. Also remove any tape that is on the bottom of the trailing cable under the scanner mechanism that prevents it from moving all the way to the left.This worked for me, It drove me nuts till I found out.

On the top of the scanner mechanism, there is a black tab that gets caught on the underside of the scanner surface, just beyond the glass, towards you. You will hear a gear grinding sound, that"s the tab getting caught. either bend the tab down, or remove it. Its on the black cover that"s on top of the scanner mechanism. Also remove any tape that is on the bottom of the trailing cable under the scanner that prevents it from moving all the way to the left.

On the top of the scanner mechanism, there is a black tab that gets caught on the underside of the scanner surface, just beyond the glass, towards you. You will hear a gear grinding sound, that"s the tab getting caught. either bend the tab down, or remove it. Its on the black cover that"s on top of the scanner mechanism. Also remove any tape that is on the bottom of the trailing cable under the scanner that prevents it from moving all the way to the left.

HP website
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-2520-3&lc=en&dlc=en&cc=us&lang=en&os=228&product=64986

Direct Download for driver and software
ftp://ftp.hp.com/pub/softlib/software3/COL1232/oj-2520-3/A1401_20_ENU_XP.exe

Hi there
I ones need to buy a head for my printer but I gave up to tell you the truth a new head could cost you nearly as much as the printer cost, so not worth it and trying to buy one is going to be a big job sorry.

All The Best Pineworks

Buy a new cord anywhere where computer products are sold. I believe your model uses a USB Print cord.

Thanks for your interest in FixYa.com

please disconnect the power cable from the wall outlet then press and hold the power bottoum for 20-30 sec then restart
and try to copy test page if still it not work then follow this instrution mention from the below URL it was the most easy step
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00787271&cc=us&lc=en&dlc=en&product=64986
if still it not work then try this URL mention from the below

http://h10025.www1.hp.com/ewfrf/wc/document?docname=bpu01831&tmp_track_link=ot_recdoc/c00787271/en_us/bpu01831/loc:2&lc=en&dlc=en&cc=us&product=64986
now if it does not resolve then follow this instrution mention from the below URL


http://h10025.www1.hp.com/ewfrf/wc/document?docname=bpu00734&tmp_track_link=ot_recdoc/bpu01831/en_us/bpu00734/loc:4&lc=en&dlc=en&cc=us&product=64986
if still it not resolve your problem then connect HP toll free number they will replace your printer if it is in warrantry priode

thanks
regards
Hamid