20 Most Recent HP PSC 1510 All-In-One InkJet Printer - Page 5 Questions & Answers

I have the EXACT SAME problem. Exactly. Did you figure it out?

In most cases the printer driver software can have errors while being in use or is shut down. So to reset remove your printer from the PC and uninstall the printer software. Now reinstall the printer software and then connect the Printer to be detected as a new hardware as it will be installed. Now check the printer properties to see the ink levels.
Activate head cleaning before a test is taken . Sometimes it is possible that the head is not reacting to the need of the PC command or can be an issue with ink drying or poor ink cartridge contacts.

Your printer uses the following ink cartridges:

• HP 92 Black Ink Cartridge (HP part: C9362WN#140)
• HP 93 Tricolor Ink Cartridge (HP part: C9361WN#14
• dentifier"><span class="type">SKU</span> <span class="value">C9361WN#140</span></span>HP 99 Photo Ink Cartridge<span class="identifier"><span class="type">SKU</span> <span class="value">C9369WN</span></span> (HP part: C9369WN)

Hi:
Take the printer and gently turn it upsided down and gently shake the printer, something is blocking the paper path. Generally a child will put someting inside the printer that you know nothing about, if not then something mechnical such as a plastic part in the printer has come loose and is in the paper path.

Normal 0 Driver could be corrupt.
Disconnect the printer or at least be sure it is turned off. I'd do both and reinstall the CD software program that came with the printer. When the software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

I have an HP Photsmart C4100 printer. I purchased remanufactured ink cartridges (both black and tri-colored) from Vivasmart. The black one works fine, but when I installed the tri-color, I got an error message that says "Print cartridge problem" The following print cartridge has a problem:
Tri-color. And I can't print. The screen on my printer says "Remove and check color cartridge." I have done this several times and it still won't print. I have turned off the power, removed the cartridges, and unplugged the unit, but it still didn't help. Any suggestions?

You can check it on the settings>Ink levels on the printer software

Problem After you install a print cartridge, one of the following messages appears on the color graphics display:

• Incorrect Print Cartridge
• Incompatible Print Cartridge
• Problem with the Print Cartridge
• Remove and Check [color / black or photo] Cartridge
• [Tri-color / Black or Photo] Print Cartridge Inserted Now is Not Intended for Use in This Printer

NOTE: In the procedures below, the "problem" cartridge is the one identified by the message on the color graphics display. If the message does not specify a cartridge, perform the procedures on both cartridges. Step 1: Remove, inspect, and reseat the problem cartridge The print cartridge may not have full electrical contact with the printer. Removing and reinstalling the cartridge may help.
NOTE: HP cannot guarantee the quality of remanufactured or refilled cartridges.

1. Make sure the printer is on. Press the Power button if it is not lit.
2. Open the printer cover, then wait until the print cartridge carriage is idle and silent.
3. Press down lightly on the end of the problem cartridge to release it. Figure 1: Removing the tri-color cartridge
   
4. Slide the cartridge out and inspect it:
   CAUTION: Do not touch the copper electrical contacts or the ink nozzles. Figure 2: Electrical contacts and nozzles 1 - Copper electrical contacts 2 - Nozzles
   • Check the electrical contacts for debris.
   • Make sure all the clear nozzle protective tape has been removed.
     CAUTION: Do not attempt to remove the copper electrical strip! Figure 3: Removing the clear nozzle protective tape
     
   • Look at the number on the print cartridge label and make sure it is compatible with your printer. Compatible print cartridges are listed in the Printer Reference Guide supplied with your printer.
5. If the cartridge is compatible, reinstall it in the printer:
   • Cartridges marked with a triangle go into the left carriage slot.
   • Cartridges marked with a square or pentagon go into the right carriage slot.
   
   

Step 2: Clean the problem cartridge contacts

1. Gather the following items to clean the cartridge and carriage:
2. • Clean distilled water. Use bottled or filtered water if distilled water is not available. Tap water can contain contaminants that damage the cartridge.
   • Clean cotton swabs or any soft, lint-free material that will not stick to the cartridges (coffee filters work well).
   • Sheets of paper or a paper towel to rest the cartridge on during cleaning.
3. Open the product cover and wait until the carriage is idle and silent.
4. Remove the cartridge and place it on a piece of paper with the nozzle plate facing up.
   NOTE: Clean the contacts quickly so that the cartridge is not outside of the product for more than 30 minutes. If the cartridge is outside of the product for too long, the ink can dry and clog the nozzles.
5. Unplug the product from the electrical outlet.
6. Dip a swab in the clean water and squeeze it to remove most of the moisture. The swab should be only slightly damp.
7. Clean the cartridge contacts.
   CAUTION: Do not touch the ink nozzles.
8. Clean the contacts in the carriage, inside the product.
9. Either let the cartridge sit for 10 minutes to allow the cleaned area to dry, or use a new swab to dry it.
10. Reinstall the cartridge.
11. Reconnect the product to the electrical outlet.
12. Close the product cover.

Step 3: Repeat reseating and cleaning steps If the problem is not solved, repeat the reseating and cleaning procedures above.

Call HP if the cartridge is covered under warranty to replace the cartridge
or its time for a new printer

Hi,

I will suggest you try reset the printer, follow the instruction below to reset your printer, if the problem still persist, reinstall the printers driver, you can also replace the cable that connects the printer to the power outlet. If that did not still fix the problem,
1. Without turning the unit off, unplug the power cord from the back of the product.
2. Press and hold # and 6 keys.
3. While holding those keys plug the power cord back in.
4. Wait until the screen goes blank before you release those keys.
5. Follow on printer screen instructions. With all this, the problem should be fix.

Check the scanner unit for dirt on the optical pickup element. In the worst case, you have a dead sensor, but dirt or foreign objects are more likely. I've even seen lines produced by White-out that got smeared off of the original (scanned before the White-out was dry).

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=428801

Incompatible cartridge shows that it believes that the ink cartridge installed in not compatible with this printer. It means that the printer can't use the cartridge that is installed. You need to return the cartridge and get the one that is made for your exact printer.

Take Care!
damnor01

This could be your issue...hope it helps! ">

There are 2 black cartridges which can be used in PSC 1510 ie 92 and 94

92( 5.5 ml) can print around 210 pages if its being used with HP 93 ( Tricolor) cartridge

94(12 ml) can print around 470 pages if its being used with HP 95 ( Tri Color) cartridge

You can also check it on HP Website click here to check on HP

This may be difficult if you just leave the color slot open. Some printers recognize that it is empty. Most times you can bypass this by placing the old cartridge back into the unit and it will think it is a new one.
Go to the printer properties and select black and white or grey scale.

The envelope is maybe too thick for the feed to pick it up.

Som sorry. PSC1410 uses cartridge HP21 for black and cartridge HP22 for color. PSC 1510 uses HP92 and HP93.

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&product=428800&

here u can download..