20 Most Recent
Zebra Z4M Printer - Page 2 Questions & Answers
Error condition head open
First test this: remove the ribbon close head if the error goes away it is not your sensor. Most of the time someone has loaded the ribbon on a little to hard and broke the plastic tab that insure it loads correctly. With the tab gone you may get lucky and load it right sometimes and other times not this is why some ribbons work and some do not.
4/8/2014 8:45:50 PM •
Zebra Z4M...
•
Answered
on Apr 08, 2014
Z4mplus
try to move up the silver plate unther the print head.
this silver plate is the "print head open" and the media sensors.
6/28/2013 6:17:32 PM •
Zebra Z4M...
•
Answered
on Jun 28, 2013
Error cleared head open
This is not an error, it is a notification that the head has been open and is now closed. If you get Head Open warning when the head is closed check the metal area over the top of the sensors are clean as it is reflective.
6/28/2013 6:15:29 PM •
Zebra Z4M...
•
Answered
on Jun 28, 2013
Same problem with 160S
The 160S has a different main logic board, which the processor is different. I wonder if you could try and open up the cache. There is a ZPL command for that, which is COY. You can find this in the ZPL programming manual on the website. I can supply the link if you are still in need of a fix.
12/11/2012 12:53:51 AM •
Zebra Z4M...
•
Answered
on Dec 11, 2012
Not finding what you are looking for?