20 Most Recent Element Electronics FLX3210 32 in. LCD TV - Page 4 Questions & Answers

have you been watching through cable program or coming from a satellite box.tried with reset the cable box.

If you have electronics experience - check the power supply and make sure you are getting the correct voltage to your inverter boards and main av board - also do you see any movement on the screen take a flashlight and shine on the screen - if you can see a dark image on the screen check inverter boards and power first.

thanks,

michael

Check the connection strip wires that goes to LCD panel from T'Con board. Reseat them all.

Check and replace its main system memory IC.

Check and replace its T'Con board. Check the connections of ribbon cables that goes to panel from this board for rigidity.

A lesson to learn--not all remotes will program for all models--a limited number of codes are in most remotes and that set likely has a odd one--way to try to force people to buy a remote from them.

i have a Element 3210 black screen, sound but no picture. on the power circuit board any electronics 101 person can spot for you blown capacitors which you can pick up at radio shack and have replaced by a competent electronics tech.

i would try adifferent remote maybe

I doubt the Ge will even program for that set---Google both the model number of the remote and the set to locate the available information.

32 Inch if more than two years old may not be worth repair and this model may not have the conventional backlight system.

HelloYou want to connect your TV with an external audio device, and want to hear sound from it, I assuses, and posts this solution.There is audio out sockets at the back side of the TV, very near to S-Video socket. Marked audio "L" & "R". These two sockets are audio out socketsfrom TV to connect any external audio amp. Just use an audio cable to connect these sockets, to 'Audio IN' of the amp socket. Switch ON both the devices. You can hear the audio of your TV programmes by the amp you conneccted with.The picture of the AV cable is given here. Take red and White colourd connections to connect the TV with amp. Left the Yello coloured pins free. It is meant for video.

Check the two caps (10uF 450Vdc) by the inverter transformers, also check fuse F2.
Worst case will be shorted out ballast caps in the LCD panel assembly.
http://s807.photobucket.com/albums/yy352/budm/Element/Element%20FLX-3210/

It is the same power cord as used for your PC. One end is NEMA5-15P, anther end is IEC C13.
RadioShack or local PC repair shop should have them.