Hotpoint BWM12 Front Load Washer "timer stuck mid cycle" Questions

gets stuck in mid cycle machine seems to get stuck in mid cycle and keeps running . Kenmore front load model 970-c40052-oo you need a new timer mechanism

...COLD CYCLE AND IT IS STUCK ON THE SAME POSITION FOR A LONG TIME YOU MIGHT HAVE A FAULTY TIMER BEST YOU HAVE IT REPLACED IF THAT IS THE CAUSE.LET ME NO IF YOU NEED ANY MORE ...

...starts goes directly into Fastest spin then Error comes up again E62. It seems like its stuck in a mid cycle and cant reset. Any help would be really appreciated. Thankyou. Probably cycle timer ...

...stuck mid-cycle My Whirlpool AWO3761 washing machine stopped 5 minutes prior to end of cycle and will not continue. Have reset by unplugging and attempted to run a rince/spin cycle. Appears to work ...

timer counts down but gets stuck and never completely counts down. However the spin cycle is still working. Any ideas? Hello, Check the drain hose where it goes into the wall, make sure it's only 6 to

...the colors setting, with no avail. The unit appears to not have power to engage the timer dial. Please advise any suggestions... Thanks Bob Check the water level control, it could be stuck or

...water and it gets stuck at the 6 minute changeover. It will run stuck at this point indefinitely if I let it. We just set a timer for the fill time, then manually advance it past this stopping

...timer is probably sticking (needs replacement) or lid safety switch stuck open. try restarting the load and if stops at the same place it is the timer unit, if it fills up with water and than stops - ...

...stuck mid cycle like any were in the wash cycle I had this problem with a washer a few months ago. I believe it has something to do with the timer. Not too sure about this washer, if knobs are ...

...stuck in this loop until it is turned off make this steps and fix it. God bless you Lid Switch Assembly If the washer stops mid cycle the lid switch assembly might be defective. This is a very common ...