Kymco Venox 250 - Popular Questions, Answers, Tips & Manuals - Page 4


Hi, Howard for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kymco, despair not, for a mere $15 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.bikebandit.com/blog/how-to-clean-out-or-rebuild-your-motorcycles-carburetor
how to clean and rebuild motorcycle carburetor for maximum performance
KYMCO Hipster 125 Service Repair Manual Download Download Manuals Technical $15
Genuine Kymco spare parts
Owner Manuals KYMCO

2004 Kymco... | 20 views | 1 helpful votes


what is kymco...we r answering world vise questions... i don't know this name tel me is this a car or a bike or any ales...

Kymco... | 21 views | 0 helpful votes


Hi, Louis for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kymco, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.kymcoforum.com/index.php?topic=10361.0
DIY How To Remove The Plastic Side Panel Scooter Moped
https://www.cyclepedia.com/online-manuals/kymco-atv-scooter-online-repair-manuals/kymco-sento-50-scooter-online-service-manual
Kymco Scooter Parts ATVs Scooter Parts Performance Scooter Parts...
https://www.manualslib.com/manual/768053/Kymco-Sento-50.html

Kymco... | 28 views | 0 helpful votes


sounds like a spark plug problem or a cracked coil

Kymco... | 27 views | 0 helpful votes


GO SEE YOUR LOCAL DEALER WHERE YOU GOT IT.

Kymco... | 26 views | 0 helpful votes


Hi, Aron, start by inspecting the fan fuse otherwise the usual suspects are:
1. Low coolant level.
2. Restricted radiator air flow.
3. Faulty thermostat.
4. Coolant pump or fans inoperative.
5. Vent hose crimped.
6. The air in the coolant and needs bleeding.
7. Engine idling too long or bike moving too slow.
8. Coolant too old needs to be replaced.
9. Faulty temperature sensor, wiring or connector.
10. Radiator veins clogged or corroded needs repair
11. Ignition timing retarded.
12. Spark plug heat range too high.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.manualslib.com/manual/750570/Kymco-Xciting-250i.html?page=71
https://www.google.com/search?q=fuse+box+location+2007+Kymco+Xciting+500&tbm=isch&source=univ&sa=X&ved=2ahUKEwjTwq7b-_jhAhXmm-AKHargDzUQsAR6BAgGEAE&biw=1440&bih=757
KYMCO XCITING 500 Service Manual
https://www.oemmotorparts.com/oem4.asp?M=kymco&T=xciting%20r500i&Y=_&L=kymco_xciting%20r500i
https://www.manualslib.com/manual/393389/Kymco-Xciting-250.html#product-XCITING%20500

2007 Kymco... | 22 views | 0 helpful votes


Hi, Randy you are going to have to buy a new ignition switch, for more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.youtube.com/watch?v=knADT8araA4
https://www.youtube.com/watch?v=_a0iFxEavkc
Hotwire any 4 wire motor scooter Simply
KYMCO People GT 200i Service Manual
http://www.2wheelpros.com/oem-parts/0000-kymco-yager-gt-200i.html
https://www.manualslib.com/manual/751568/Kymco-People-S-50.html#product-PEOPLE%20S%20200


2010 Kymco Yager... | 19 views | 0 helpful votes


Hi, Steven for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kymco, despair not, for a mere $30 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=Stop+light+switch+location+kymco+Compagno&tbm=isch&source=univ&sa=X&ved=2ahUKEwiLs-7t9oriAhUjhOAKHbxFBbMQsAR6BAgHEAE&biw=1440&bih=757
https://www.amazon.com/UMPARTS-Switch-Replacement-Scooter-Downtown/dp/B073FNMH3F
https://www.repairmanual.com/product/cyclepedia-kymco-compagno-110i-scooter-printed-service-manual $30
https://www.scooterdynasty.com/compagno1104tac.aspx
https://www.kymcousa.com/admin/dealeronly/ownerman/onroad/Compagno110i-OWNERS-MANUAL.pdf

Kymco... | 17 views | 0 helpful votes


Firstly, I don't know whether the vehicle has an immobiliser or other type of anti-theft or security system but it would be an unusual modern vehicle if it doesn't and if so it might be the cause of the non-starting.
I am not familiar with the model but I expect it has many similarities with most modern vehicles where there is an engine management computer that drives the ignition coil and fuel injection system after processing information from a number of sensors. Replacing components without testing can be expensive and fruitless and unfortunately that needs a measure of experience and some specialised equipment.

Kymco... | 24 views | 0 helpful votes


Hi, KC for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kymco, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=Vacuum+line+routing+2009+Kymco+People+150&tbm=isch&source=univ&sa=X&ved=2ahUKEwi5oOi2lOLhAhUQSN8KHUoJADoQsAR6BAgHEAE&biw=1440&bih=757
How is the Vacuum line set up on gy6 150 cc chinese scooter
http://www.49ccscoot.com/manuals/Kymco_People_S_50-200_Service_Manual.pdf
Kymco Scooter Parts ATVs Scooter Parts Performance Scooter Parts...
https://www.manualslib.com/manual/627924/Kymco-People-50.html#product-PEOPLE%20150

2009 Kymco... | 31 views | 0 helpful votes


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kymco, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=Solenoid+brake+problems+Kymco+Mini+LS&tbm=isch&source=univ&sa=X&ved=2ahUKEwi54s21ntbhAhWomeAKHSvxABQQsAR6BAgGEAE&biw=1440&bih=757
https://www.youtube.com/watch?v=n_rI53xrCh4
https://www.manualslib.com/manual/934427/Kymco-Mini-Ls.html
https://www.wheeliegoodmobility.co.uk/mobility-scooter-spare-parts-diagram.html
https://www.manualslib.com/manual/875339/Kymco-Mini-Ls.html

Kymco... | 38 views | 0 helpful votes


You've got a Ignition System Issue which narrows things down quite a bit. It's either the ignition switch that your key goes into, or an on/off(run/stop) switch, or it's a relay for the ignition systems(or starter relay), if it's none of those then it's the starter solenoid that you've been jumping with the screwdriver, it sounds like the starter is working as it should since it turns over- the reason it turns over but won't actually run is because the ignition system won't work unless the key is inserted and in the run position, or if there's any other on/off switch that controls your engine it could be there. I'm not familiar with this exact bike but this is a common issue with all motorized machines! You can bypass all of this but that requires running some wires and a couple of switches plus a relay or two- that's an option but don't do that as your issue is nothing major and would be easier to fix than to go through the trouble of re-wiring it all. Just start troubleshooting and eliminate one part at a time, check relays, fuses, and electrical connections first, then the individual components I listed above and check to make sure they have power coming in and out when/where they're supposed to. If your bike turns over but won't run and the key is on, and you have a functional Ignition system then you need to verify you have ignition by checking your coil's output. EASIEST way to do so is pull a spark plug and connect it to the spark plug wire as you normally would, then hold the spark plug against the engine to ground it and turn it over- you'll see if you have any spark jumping aroundbetween the spark plug's electrode and the base of the plug itself. Either way, you'll get this figured out now that you know where to start and what to check!


76522e9f-b2bb-4336-a115-e53197ce5a3b-pujhmq5yz2fla13a1caeolco-4-0.jpeg

Kymco... | 32 views | 1 helpful votes


Arriving at a fair price for any secondhand vehicle is very difficult and many variables should be considered though in the final analysis anything is only worth what the market will pay - if the seller asks too much the buyer will walk away.

There are many publications providing guide prices for all manner of vehicles - but these are only a guide and some models tend to command higher prices because of a good reputation while other models with a reputation for trouble or high running costs can fall far below.

No vehicle should be bought without a thorough inspection and price adjustments made for faults found and any pending work, taking due consideration of fair wear and tear.

A service history is important but will affect the price only if it can be fully verified by the presence of official invoices and a vehicle should only reach the guide price if the literature pack, the full complement of keys, tools, accessories, etc. is present. The replacement cost of some of the modern keys can be eye-watering so it is important to think ahead.

The presence of local dealer expertise and a spares service is worth a little extra and the absence of a local dealer drives the price down a little.

I hope this helps...

Kymco... | 19 views | 0 helpful votes


Check all wiring connections and especially those on the battery, starter, and starter solenoid(if seperare from battery). It sounds like something is just making a bad connection since it won't even turn over- I bet your problem is in this area, good Luck and if I've been helpful please click the green button to let me know, Habe A Great Day!

Kymco... | 58 views | 1 helpful votes


Hi, Milvin, it should be noted that the reasons your check engine light or CEL stays on constantly or flashes and your bike will or will not start and may turnover or not, these conditions will vary from bike to bike depending on the year, make, and model and you should always refer to your owners/service manual for proper diagnostic procedures. It should also be noted that any type of prior work done to the bike or an abnormal event occurrence IE: adding accessories, electrical curiosity or adventures, laying the bike down or crashes, rainstorms or bike washings just before CEL light issues started can be significant hints or aids into tracking down the gremlin, also for 2003 and older models carry the appropriate jumper wire to access fault codes and reduce the risk of being stranded or towed also keep in mind that your CEL comes to life if anything, and I do mean anything isn't 100% with the ECM like parameter spikes. This means that you could be staring at a major repair, or your speedometer sensor is contaminated and needs to be cleaned.
And the usual suspects are:
1. Severely discharged or a damaged battery check the terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary, you should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
2. Faulty charging system.
3. Faulty system sensor some models have up to 40 sensors
4. Faulty safety switches: run/off, ignition, clutch lever, neutral, side stand, tip over, fuel, and or their connections.
5. The engine got wet where it didn't like to get wet.
6. Faulty ignition circuit spark plugs, coils, cables etc.
7. Broken wire or worn insulation exposing wire to a ground situation especially inside wire harness at tight bends around fairing brackets, under dash panels, under fuel tanks over cylinder heads etc. Many harnesses are open on the ends that will allow water to enter and accumulate at v-bends.
Dielectric grease and contact cleaner are your best friends for wire/cable/harness connectors, look for corroded, broken, or loose pins/sockets. Run speedometer diagnostics and check for generated fault codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.kymcoforum.com/index.php?topic=8768.0
https://www.manualslib.com/manual/836387/Kymco-Downtown-200i.html?page=136
KYMCO Downtown 200i Service Manual
kymco service parts manuals
https://www.manualslib.com/manual/901546/Kymco-Downtown-125i.html

2009 Kymco... | 24 views | 0 helpful votes


Can be a loose / bad connection somewhere in the high current starter circuit, or a flat battery.
Did it start ok a few times when you put in the new battery?
Yes >> not charging the battery (or not charged when fitted).
No >> Bad connection between battery and frame or between battery and main ignition key power connection point (usually to a fuse).
The cause of solenoid clicking is the voltage dropping dramatically when the starter current begins to flow, usually a flat battery or a loose or dirty connection in the starter current circuit (will generate heat when clicking which can help you find it).

Kymco... | 35 views | 1 helpful votes


Your first option is to check the basics.
Is there fuel in the tank? Yes, I know that sounds silly but I have done it!
Check that the fuel lines all the way from the tank aren't blocked.
Is there a fuel tap, (petcock), fitted? They usually have a gauze filter built into them that might need cleaning.
Is the fuel filter a new one?
When was the last time the carb was overhauled?

Kymco... | 30 views | 0 helpful votes

Not finding what you are looking for?
Motorcycles Logo

-30 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Kymco Experts

Marvin
Marvin

Level 3 Expert

84966 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

5873 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Kymco Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...