Edimax Computers & Internet - Page 3 - Recent Questions, Troubleshooting & Support

Read this page about a problem with Windows 7 reset/set-up. http://www.edimax.us/html/Faq/PIN%20code%20not%20existed%20on%20the%20router.pdf

If you do not know the password, you need to reset it to the factory settings and set up a new one. See Manual http://us.edimax.com/edimax/mw/cufiles/files/download/manual/transfer/Wireless/BR-6424n/BR6424n-User-Manual_EN.zip

Press the reset button at the back of the router and hold for 20 seconds to clear all settings.

Press the RESET button and hold it for 20 seconds to reset the access point to factory default settings. The default IP address, admin user name and password are written on the back of the router. http://us.edimax.com/edimax/mw/cufiles/files/download/manual/transfer/Wireless/EW-7228APn/EW-7228APn_Manual_v1.1.pdf

You can download the Quick Install Guide on the bottom of this page to run on the PC or Apple MAC. EDIMAX Technology Official Website N150 Indoor 150Mbps Wireless 802 11...

Here is the manual for the router and how to set up the router t the Internet. http://us.edimax.com/edimax/mw/cufiles/files/download/manual/transfer/Wireless/BR-6226n/BR-6225N_Manual.zip The Cellphone is capable of using 802.11b/g/n. So it should be capable of being set-up on Wi-Fi to use the router, as long as you set up the correct SSIS and password for the router. Here is the manual https://www.nttdocomo.co.jp/english/binary/pdf/support/trouble/manual/download/N-04C_E_All.pdf

The DHCP of the router has not been set-up, you need to follow these instructions to access the router by making changes to your computer. You also need to connect to the Ethernet port direct with a cable to program the router. How to login to AP page

Here is the manual which shows how you to change the NAT options. http://www.edimax.co.uk/edimax/mw/cufiles/files/download/manual/transfer/Wireless/BR-6428nS/BR-6428nS_Manual.pdf

You cannot, your device cannot support the security protocol used by the EDIMAX access point.

The PIN number is written on the back of the Router, next to the serial number.

It does not need to have a CD-ROM, the drivers are located in the Wi-Fi chip itself, You just have to plug it in and it will install the drivers, and then check the internet to see if there is an up to date version. Here are the instructions- http://www.edimax.us/html/Faq/EW-7811Un-noCDdisc-Win7.pdf Here is the latest drivers, which make it compatible with Windows 8.1. EDIMAX Technology

If you are talking about accessing the router to reconfigure it, you should read this first as Windows 7 has a problem with the PIN code used. http://www.edimax.us/html/Faq/PIN%20code%20not%20existed%20on%20the%20router.pdf

Read the manual http://www.edimax.co.uk/images/Image/manual/Wireless/EW-7228APn/EW-7228APn_Manual_v1.1.pdf

It is the security protocol that is not supported. So you cannot use it with a PSP.

On the back of the router.

WK-1074 is not listed as a EDIMAX router. Contact technical support is you think this is wrong. EDIMAX Technology

You need to download the manual for this Middle East version of the access point/ wireless extender. Page 4 covers resetting the router so a new password can be put in. http://us.edimax.com/edimax/mw/cufiles/files/download/manual/transfer/Wireless/EW-7206APg/EW-7206APg_PDg-Manual-EN.zip If you press and hold the reset button for more than 4 seconds, the Access Point will reset to the factory defaults (Warning: Your settings will be deleted and replaced with the factory default settings).

You need to contact technical support who could supply a copy of the original firmware, which you could re-install, over the upgrade. ? necessario contattare il supporto tecnico che potrebbe fornire una copia del firmware originale, che si potrebbe ri-installare, sopra l'aggiornamento. Support Services

You need a SSID which is different to the original router, so it needs to have one. But it can be hidden in the configuration, not to be broadcast on the wireless network, so you would have to enter it manually without seeing it in a list. http://us.edimax.com/edimax/mw/cufiles/files/download/manual/transfer/Wireless/EW-7438RPn_Air/EW-7438RPn%20Air_manual.pdf

You need to read the manual. There are four different types of 7438RPN extenders. The device needs to be located within the range of the Telstra wireless router, you do not say which router has been provided, so I cannot comment on the set-up of the Telstra router. This is the Air version of the manual. http://us.edimax.com/edimax/mw/cufiles/files/download/manual/transfer/Wireless/EW-7438RPn_Air/EW-7438RPn%20Air_manual.pdf

There is a 8 digit pin number on the back of the router. Windows 7 however has a problem and there is a solution here. http://www.edimax.us/html/Faq/PIN%20code%20not%20existed%20on%20the%20router.pdf