Drivers to Install Belkin G+ MIMO F5D9050B on Vista Home Premium

Download the appropriate Windows 7 driver from here:

http://en-us-support.belkin.com/app/answers/detail/a_id/3111/~/f5u257-usb-to-serial-adapter---drivers

Use the 64 bit one if you have a 64 bit OS, and a 32 bit one if you use a 32-bit OS.

Or you can download both, start with the 64 bit one. If it is not compatible, the installer will complain and abort.

Hi,
Please check with the below Drivers, If Not Please refer the Installation Manual for help.

• XP 32 Bit
• Vista 32 Bit
• Installation Manual

You don't actually need a driver to set it up. Just plug it into your network, then browse to its URL (likely 192.168.1.1, but could be 192.168.0.1, or 192.168.2.1). Then just follow the prompts to configure it. Hope that helps.

Belkin does not yet provide Windows 7 drivers, nor for 64bit operating systems, see http://en-us-support.belkin.com/app/answers/detail/a_id/3209/p/207. However, the Vista 32bit drivers may work on Windows 7 32bit.
Check back at Belkin's web site occasionally, they are working on the problem.

Im Not sure this will Work
But in most Cases it will So I think its Worth a try

You will need to find the version of the Adapter

And After that Goto www.belkin.com/support

On the top right hand side on the search type F5D9050

On the results select the Link that has the Drivers

Download the Driver for the version of your Adapter

Right click on the downloaded file and select Properties

Click on the compatibility tab

Select Run this Program in compatibility mode for Windows Vista SP1

Click Apply

Now install the Drivers

http://www.belkin.com/support/search/?q=wireless+g+%2b+mimo

Turn off the system, remove the USB device. Turn on system, insert USB device. You can always reload it if need be.

You will need to connect your laptop to an ethernet connection to get on the internet so that you can download the drivers for your MIMO USB ADAPTER. You can also download the file on another computer and use a flash drive or burn a CD to transfer the files to your laptop.

when enabling wireless security the router and adapter must be both be configured and configured in a fashion that both support. If you need help provide confirmation of your wireless router's manufacturer and model and the same information for any wireless adapters or computers with built-in wireless adapters to be wirelessly connected.

This will allow us to determine the common security options for all wireless devices you have.

Belkin drivers are a bit of a pain, uninstall the drivers again and remove the usb adapter, and follow exactly as per instructions, normally driver first, but ignore the pop up about the driver not being a signed windows if it does, just click install anyway. toward the end of the installation you should be prompted to connect the usb adapter, the hardware should be found and then the installation should complete. If driver installed ok but the adapter cant find the the driver plug it into a different usb port and again the found hardware should pop up then install driver popup should show and you should select install automatically.