Hello guys. I just bought my Belkin N150 Wireless Router and I have a little problem. Everything is fine, it just works perfect, but it seems that I can't change the default password (which is <blank> btw) set to the router. In System Settings there are 3 options about the password change.
-Type in current password (I left it blank, but nothing...Also I tried admin but again nothing...)
-Type in new password (well i typed the new password :P)
-Confirm new password (I confirmed!)
I don't know if the problem is in the first setting or if there is another problem that doesnt let me to change password (btw when I apply the changes it says that changes were succesful, but still someone can login to the router without a password...). Thanks in advance!
Posted by dragonumia on
Contact Belkin for Care at 1-800-585-2494 Toll Free.
Posted on Dec 15, 2016
I recently bought a Belkin N1 Wireless router, F5D8231-4 v4000, to replace a Belkin 802.11b router. Hooked everything up and got it running with no problems, except now my Nortel VPN client will not connect for work. I am able to access the Internet from the laptop but when I try to connect the VPN client it times out. I have put the Laptop in the DMZ and I have disabled the firewall but nothing works. Also I can ping the VPN switch via the domain name and IP address. Belkin Tech support has been useless so anything anyone knows would be grately appriciated!
Belkin says IPSec pass thru works now. I'll know tomorrow.
F5D8231-4 WW v4.00.18
Posted on Jan 29, 2008
Cannot connect to the firmware information server, please double check wan connection
Posted by kevinchica... on
You will have to update the firmware manually
Goto the website www.belkin.com/support
Under No 1 : Select N / G / B.... As given in the router
Under No 2 : Select the Model Number of the router
Under No 3 : Select the Version Number
Click on the link For firmware update ..... Download the appropriate version as your router
Save the file
on the address bar of internet explorer type http://192.168.2.1 and hit enter
On the left under utilities click firmware update
Leave the password blank and click submit
Click browse ,,, Locate the file you had downloaded and click update
Click OK For confirmation
Posted on Jul 28, 2010
how do i connect my router to my telephone line
Posted by peapod2 on
The telephone line doesn't connect to the router. The telephone line goes to the modem which is provided to you by your internet provider. Then an ethernet cable is connected from the modem to the router.
The modem allows the internet connection to be active, The router is used to distribute the Internet to create a network.
Posted on Sep 16, 2009
I have a Belkin Wireless N router and an Embarq 660 modem. I have gone to the Belkin URL 188.8.131.52 and have verified the settings. I changed the router's IP address to 184.108.40.206 to make certain that there is no IP address conflicts between the router and the embarq modem. I have restarted my laptop (Windows Vista OS), released/renewed the IP address on my laptop and still the Belkin router does not recognize the connection to the internet.
The yellow ethernet cable is running from the 660 modem to the router and then I have tried both using a network cable as well as a wireless connection and nothing. No internet.
If I run the yellow ethernet from the modem directly to my laptop I'm online and surfing.
Posted by wwrose on
Make sure your physical connection is correct. From the modem, the ethernet cable should plugged in to the Internet/WAN port of the router. And your computer to port 1. Access the setup page of the router again and Enable the MAC Address Clone setting. Clone the MAC Address of your PC there then power cycle the router and modem. You should be all set.
Posted on Apr 15, 2009
I have a Model F6D4230-4 V3 Belkin wireless router. I have done the installation but as soon as I unplug the ethernet cable from the computer I lose the internet. The wireless light does not come on on the router.
Posted by valerie... on
You will need to check the wireless settings of the router.
If your network is secured then make sure that you are typing the correct network key.
also make sure that the DHCP server is enabled on the router.
is there any computer connected to the router ?
If yes then you can open the router set up page on that computer.
Router set up page is the page where you can check all the wireless settings of the router.
Click here for step by step instructions
Posted on May 28, 2010
how to change my nat from strict to open
Posted by bsuggs on
How to change the nat settings on my belkin play router from strict to open so i can play the ps3 online gameplay more easily.
Posted by victorsosa... on
what about to set the ps3 ip address on the DMZ for the router that will give all the ports open to that address and will play freely
try go to advance settings and firewall or game and applications there is where you will set dmz application .
Posted on Jul 28, 2010
hey i really need the help im having trouble setting up my belkin N150 enhanced wireless router.
My internet provider is tesco broadband that uses speedtouch to connect itself to the internet.
on my belkin router all the lights are green on the router part from the internet light that is flashing green then goes to flash amber and i cant get the past the first stage on the instulation on the CD insulation that comes with the product.
Though when i first put the CD in i got to the second to last stage of the insulation that asked for my user name and password for the internet but it couldnt connect and when i try to restall the CD it dosnt make it past the first part have you set up stage
Would love the help guys thank you for taking your time out to read this.
Posted by sensesjunk... on
Do you have a user name and password to connect to the internet?
If you have that then you will need to set the router to PPPOE connection.
If not , then you will need to set the router to DHCP mode.
First make sure that your computer will be able to go online through the modem. It is very simple and you don't need the CD.
You can set up the router like the DSL connection.
Click Here for more info on how to set up the router.
Posted on Oct 14, 2009
I need drivers to install this Belkin wirless G + MIMO USB Adapter Model No F 5D 9050B on my new computer that has Vista Home premium 32 bit with SP1.
The installation CD wont install the drivers as the system requirments mentioned on it are 2000 and XP only
460 questions posted
Usually answered in minutes!