At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
IF THE POWER LIGHT IS BLINKING BLUE - The computer is in standby mode. Press a key on the keyboard, move the mouse, or press the power button to resume normal operation.
Remove the main battery and try again, also! the power adapter charger should be checked for correct voltage, if okay! pull one stick of ram and test, and the second piece not forgetting to put the first one back and power up, if all this fails you will need to get it assessed.
Since it sounds like an issue with the Power first try to release flea power.Disconnect the charger,remove battery,press and hold down the power button for 30 seconds.Reconnect the battery and charger.Turn on system and check if it turns on. For further help please check Dell Inspiron 1525 Manual. Also confirm if the light on the charger stays on,when connected to the system.
Clean the filters. Make sure that the vents are not blocked. fan are working? Make sure the lamp door is secured, Projector manufacturers will make the projector inoperable if the door isn't secured tightly. Reset the lamp timer. email me at [email protected] if you need a manual.
Flashing blue light is harmless - it simply means the Identify button has been pushed. There is a small button with a white, cursive 'i' on the front and back of the server - pressing this will make the light flash blue (or make it stop).
Go to Dell's support site and view the manual for the 1650 for an explanation of the beep code - identify the pattern of the beep.
If you are still able to get to Windows, use OpenManage Server Administrator to check the Hardware logs and RAID array.
Possibly the power board or the sustain board has died. Power board failure does not stop the blue light from working as this is an LED on voltage side of power transformer. The set fails because it has detected a voltage difference in one o0f the other boards that controls the initial starup and convergence. Some transistors and capacitors are also possibly involved. Not a dIY unless you are skilled. Parts $300 labour ? but about $400 If you are a DIY get a kit from this site, complete with step by step instructions This is an LCD rear projection set.The yellow blob may be from the
drivers to the LCD display, dirt or object on the projection mechanism,
stain on the mirrors or lamp; bad projection lamp - among others.If
you are handy, get inside the set and see if you can observe any of the
items mentioned above.
×