Push the right key (>) or the left key (<) to cycle
through the display modes.
Pages 18-21 of the user manual
Ah, sorry I miss understood.
The manual for your Belkin is available here:
http://www.belkin.com/support/product/?l...
Page 84
The N1 Vision keeps time by connecting to a Simple Network Time
Protocol (SNTP) server. This allows the N1 Vision to synchronize the
system clock to the global Internet. The synchronized clock in the N1
Vision is used to record the security log and control client filtering.
Select the time zone that you reside in. You have the option to select
a primary and a backup NTP server to keep your N1 Vision’s clock
synchronized. Select your desired NPT server from the drop-down
box, or simply keep it as is.
If you reside in an area that observes daylight saving, then place a
check mark in the box next to “Enable Daylight Saving”. The system
clock may not update immediately. Allow at least 15 minutes for
the N1 Vision to contact the time servers on the Internet and get a
response. You cannot set the clock yourself.
Cheers
×
777 views
Usually answered in minutes!
I did it, but it's changing views of the sceen, not the time. And I also lost my manual.
Thank you for your help.
Are you trying to change the date and time on your wireless router?
×