Trutech not programing to dish network remote.

Remote Codes ' MyDISH ' DISH Customer Support

https://www.mydish.com/support/remotecodes

Remote Control Manuals · Program Remote to TV/Other .... remote, product type, and manufacturer below to see the current known remote codes you should try.

My Dish remote needs programming for Sanyo TV ... - Directly

https://www.directly.com/.../dish-network-my-dish-remote-needs-progra...

My Dish remote needs programming for Sanyo TV, Model DP226649. My Dish ... Needcode. Alta asked this ... Dish Network • 16808 answers • 95% helpful. Code is ... Test volume control, if it works you're set ... try 590 it should work. tivosat.

How do I program my dish remote to work for my Sanyo TV.

https://www.directly.com/.../dish-network-how-do-i-program-my-dish-re...

Dish Network. How do I program my dish remote to work for my Sanyo TV. ... entercode 590 press pound then sat Then try to turn tv on and off then try volume.

How do you program a dish network remote to my sanyo tv? ' Ya

Hi my name is Mike Houston of DISH Network and I was going over yourpost and see you want to program the universal remote to the DISH Networkreceiver. To be able to get the full use of the receiver it is better if youhave the DISH remote, I will leave you my e-mail address if you have anyquestions about getting the remote that goes with the system. [email protected]

madfad

You'll need to either call them and have them walk through programming the remote to the TV or visit their website for the information. Here at DISH Network, we have instructions on our website with instructions on how to program our remotes to TVs. I hope this helps.

Ray Calo
DISH Network

jacques_bull

I have provided a link on how to program your DISH remote to you LG TV. This link contains all our receivers. Choose the type receiver you have and select that link. The instructions on how to program your remote will display in a PDF document. I hope this helps.

Program the remote, step 5:

http://www.dishnetwork.com/SupportSection/remote-setup
These are the common codes for the LG TV: 678, 156, 520, 512

Ray Calo
DISH Network

Hello!!!!! to program your remote to the tv, just follow the link to our website, and your remote will be programmed real soon!!!!!! Hope this helps.

http://www.dishnetwork.com/SupportSection/power-scan-instructions


Becki Barned
DISH Network Customer Service

To program your DISH Network remote to your Sony TV you will simply- press and hold the TV Mode button until all the other mode button back lights illuminate, then release.

-Now while the TV mode button is blinking please enter in the remote code 500 which is the remote code for your Sony TV after entering 500 then press the pound (#) key.

-After pressing the # key on the DISH Network remote, the TV mode button should blink 3 times and then turn off completely. This will mean the programming of the DISH remote to your TV has been completed successfully. While still in TV mode try any of the functions on the remote, such as turning the volume up or down on your TV or attempting to press the power button.

-The DISH Network remote should now be programmed to control your TV.

-If the remote code 500 doesn't program the DISH Network remote successfully you can also try each of the following using the same procedures, 000, 590, 640, 502, 002, or 567.

I hope this resolved the issue for you! Please feel free to contact us if you need any additional assistance.
-Kirstie DISH Network

cathyw43

I have provided instructions on how to program your DISH remote to your TV. I have also provided a link with the codes for TV manufacturers. I hope this helps.

Program remote, step 6:
http://tech.dishnetwork.com/departmental_content/techportal/content/tech/remotes/TechRemo5.3Code.shtml
Ray Calo
DISH Network

trifonas_ger

If you are trying to use your Samsung TV remote, it will not work with our DISH receiver. Some universal remotes can be programmed to the receiver but you may not get full functionality with the universal remote. Our remotes are designed to allow for functionality for the TV if programmed to the DISH remote (volume, on/off). I hope this helps.

Ray Calo
DISH Network

Since you dont have a popular brand set you should try using the scan method. Here is a link with a video to help program your dishnetwork remote to work with your set. http://www.disheez.com/videos/dish-network-video/programming-dish-network-remote/

dish network remotes dont work with very many tv/vcr or tv/dvd combo units