Need Username and password to setup

You sure can. You just need to resent the router to default settings including username/password, and reconfigure it all over.
Further instruction can be provided if you tell us the model of the router, and the type of Internet Service.

If you need the login password for the router's setup page, the default username: admin, password: password.


If you need the wireless key or password, you need to access the router's setup page by typinghttp://www.routerlogin.net or 192.168.1.1 in the address field of your browser(IE or Chrome). On the login use the default username and password(admin, password).
After logging in. Look at the main menu on the left, click on Wireless Settings, from there you can check the WEP or you can setup wireless security from there if you haven't done so.

**If by chance you are unable to access the router's login or setup page, you will have to reset the router to factory settings by holding the reset button on the back of the router using a paper clip or a pen for 30 seconds while the router is plugged in to the power outlet. You will then be able to access the router's setup page using the default username and password.

Hope this helps.

to access the router page for linksys, you need to type 192.168.1.1 on the address bar. username is " admin " password is " password " if it doesnt work, try "admin" for username and "admin" for password. then it would take you to the router page. and you can start configuring.

HEllo bro...

I don't know what model that use, however here the best explanation for you..

-------------------------------------------------------------------------------------------------------------
Preparation:
1. Username and password for router.
2.Username and password for provider internet.
3.Ethernet cable (rj45 connection)
5. Pc /laptop to setup router ( on step i'm referred to pc)
4. Web browser( more preferred to using internet explorer current version)
---------------------------------------------------------------------------------------------------------------

Step:
1. Plug Ethernet cable to router
2. Plug another end Ethernet cable to pcthat you are using to setup
(Now you have cable was connected between pc and router)
3.Switch on the router.
4.Open web browser. Or click here http://192.168.1.1
5.Some window will popup
6.Enter the username and password for router. If default( mean you don't change username or password,you can leave blank for username and fill password with "admin")
If still can't enter try search at google with your model and brand for username and password default.
7.After success enter, then using the wizard .
8. Fill the username and password for provider.
9.FInish.
-----------------------------------
For step 7th, to 9th, you can directly go setup internet connection( depend to model, sometimes it just type setup) where you will find ppp username and ppp password.. change it..
Good luck and be careful. sometimes you make it right but router need time to create new connection..
For the best go here Lynksis setup

Hi

There is 2 Usernames when it comes to Routers.

1st is the USERNAME and Password you use to get into the Router configurations which is the following.
Username: admin
Password: admin
The above username and password is the Factory setting and only the password can be changed by an user. SO if it was not changed the password will still be admin or you can reset the modem to reset the password back to admin.

2nd is the Username and Passsword you get from your Internet Service Provider which usually is the email address and whatever password you gave them to set your internet up

1. Access the Linksys webpage
*To access the linksys gui
a. connect your linksys to the computer via RJ45 (ethernet cable)
b. Open internet explorer and on the address bar type 192.168.1.1
c. A pop-up will ask for a username and password
c.1 username and password is both admin
c.2 username admin and password blank
c.3 username blank and password admin
d. If none work reset the modem at the back of it there is a reset button "warning if you reset the modem it will be reset to factory setting and you need to setup your router again"
e. disable your computer firewall

2. Contact you ISP for assistance setting the Linksys

Configure your router first, by doing that you need a ethernet cable (cat 5 will do). Connect your computer to your router using ethernet cable and open internet explorer, type in the ip address of your router and press enter. After that, you will be ask for username and password, just key in your username and password (if you cant remember, reset your router and key in the default username and password of your router). Once your done, go to internet setup and you can configure everything there. Hope it helps you.

Hello.

Since your ISP provided you a username and password when connecting to a broadband connection, you have to setup the router's "Internet Connection Type" to PPPoE then you need to enter the username and password that you are using to connect to your broadband.

Once you do that, the router will obtain an IP address from your ISP(MTNL) then it will give connections to your computers

Hi,

Most LinkSys Routers do have a master reset. It is a small recessed button normally at the rear of the unit between one of the antennas and the WAN/Internet port. For a full reset, you need to press this for more than 10 seconds. Of course doing a full hard reset reverts the unit back to factory default.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

I had the same problem. My Belkin N1 Router was constantly dropping the WiFi connection (every few minutes). I tried several solutions I found on different forums:
Change the channel selection from Auto to a specific channel -- I tried all 13 channels, but no improvement.

Update the firmware to the latest (Beta) version -- still no improvement.

Finally I enabled "Protected Mode" and the connection seems fine now. Hope this helps, and good luck!