HP DeskJet F380 All-In-One Printer - Page 4 - Answered Questions & Fixed issues

You may download the HP drivers from http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&jumpid=reg_r1002_usen_c-001_title_r0001&lc=en&product=1128296&

You may download the HP driver from http://h10025.www1.hp.com/ewfrf/wc/product?product=1128296&cc=us&dlc=en&lc=en&jumpid=reg_r1002_usen_c-001_title_r0001

You can download the HP printer drivers from their support WEB site. Please click on this link and select your model printer to download :- http://welcome.hp.com/country/us/en/support.html

its a good scanner once you don't put something to print and press cancel

go to printer and fax and set it up as default printer

Hi
The pictures you scan will be available under My scans folder, to navigate to My scan folder read below.
My Documents - >My scans.

If you are scanning using the HP solution center software, the picture will be saved inside the HP Photosmart essential.

Thanks
Riz

I think this problem is due to the print spooler & you just need to reset that, in order to reset the print spooler follow these steps:
- right click on computer icon & select manage.
- select Services & applications.
- select Services.
- Select Print spooler from the list of services & then click on restart.
when done, you should be able to print again.

good luck

You may download drivers and software from here.

just insert picture ur picture then open "hp solution center" installed in ur pc then now a window will appear clck on scan pictures. clck on "picture to file" then clck on scan then click on ok... ur pics will be scanned

Look at this: http://h10025.www1.hp.com/ewfrf/wc/document?docname=buu01850&cc=us&dlc=en&lc=en&product=1128296&tmp_track_link=ot_search

i think u are using the introductory cartridge which comes when the printer is new and it only has one forth the ink of original cartridge

Download drivers from the following link:http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=1128296

Reinstall printer

with new color cartridge only it have no other soloution.

Hi,Try the steps belowGo to Start / Run and type in "services.msc" without quotation marks, then press Enter or click OK.(If you are using Windows Vista/Win 7, You need to click on START button and under search program and files - Enter the Services.msc and click the same program from Program list that appear )In the window that opens (Services) look for "Print Spooler" on the rightRight-click "Print Spooler" and select "Properties".Click on the "Recovery" tab and change all 3 drop-down boxes to "Restart The Service".Make sure the 2 text boxes underneath say "1" in them.Click Ok until you are back at the Services window, close it and you're good to go.Go back into the properties of the "Print Spooler" tab and be sure to click Start to restart the Print Spooler service and it will restart the service immediately.The Print spooler depends on the Remote Procedure Call (RPC) service. Is this service disabled? Go to services.msc look for RPC. Check state: AutomaticRegards,Sean

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=1128296&lc=en&cc=in&dlc=en&lang=en&cc=in

Remove both cartridges, switch off printer and then on. After cartridge holder comes to the center install both the cartridges. Then it will print the Alignment page. After alignment page prints place the Alignment page on to the scanner and press SCAN button as mentioned in the Alignment page. After completing the scan try printing. It will print the usual speed.Note: For the alignment process both cartridges should in good working state

Go to HP web site and down load the utilities and drivers for the printer you have to your laptop. Follow the installation procedure. you'll be good to go!

You may download the HP software and drivers from here.

Download driver from the net.