20 Most Recent RCA RCR311B Remote Control Questions & Answers

Hi, try
1006, 1007, 1049, 1012, 1051, 1052, 1061, 1072, 1157, 1190, 1194, 1231, 1233.

Regards
Phillip

Here are all the possible codes that will operate JVC TV's JVC 0653 0053 0036 0154 0190 0371 0508 0606 0683 0192 0193 0218 0418 0093 1923

Sorry this is the best I could do for you. I tried to get a free copy for you but could not find one. Just copy and paste this link into your browser to see info about getting your manual.

http://www.manualuniverse.com/manager/products/manualExp.asp#mrcI

Hope this helps, let me know if I can help you with anything else.
JimmyC

Instructions for programming your RCR311B can be found here ...
http://audiovox2.info/docs/rca_acc/man/RCR311BN_DOC_OM.PDF

first wat are u trying to do,,,,,,in mind....wat way,,,,,to do wat....try going to get thing that can remote w/remote to do......reverse the plan of mind,,,,

Hello
Admiral TV is not listed with codes of RCA RCR311. OK.

Code For Model RCR311W
Code 1004 for Sanyo TV Code 1048 for Sanyo TV Code 1049 for Sanyo TV Code 1073 for Sanyo TV Code 1080 for Sanyo TV Code 1162 for Sanyo TV Code 1169 for Sanyo TV Code 1180 for Sanyo TV

You can get the manual ond the codes on the link below.

http://audiovox2.info/docs/common/RCR312W/RCR312W_OM.pdf

http://audiovox2.info/docs/common/RCR312W/RCR312W_OTHER_CL.pdf

Good Luck please rate 4 thumbs up and please leave a testimonial

HI,

Direct Code Entry:

Find the code your device.

1. Press and hold "CODE SEARCH".

2. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.

3. Enter the 3-digit code number.

4. Release "CODE SEARCH".

5. With the device on, press another button to test (volume control/power button).If it does not work, repeat steps 1 to 5 with other codes which you have.

follow the below steps to set remote without codes

Code Search:

1. Turn on the device you wish to control.

2. Press and hold "CODE SEARCH".

3. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.

4. Release "CODE SEARCH".

5. Press ON/OFF repeatedly until the device turns off.

6. When the device shuts off press and release ENTER.

7. Try using the remote. If it does not function repeat steps 1 through 6

Thank you

my universal unit won't change the tv channels, everything else works except the channel changing. Does anyone have a solution., The company is only open during the week.

0382.0333. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order. Pull up older posts. Surf the site with patience. http://remotesearch.blogspot.com/ http://electrohelponline.blogspot.com/

The red and blue tubes are bad. Time for a flat screen. Parts for your TV are very expensive.

This is not the fault with the remote control. It is with TV. Contact any service technician. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box. http://electronicshelponline.blogspot.com/

If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. http://electrohelponline.blogspot.com/ Check this link too. http://remotesearch.blogspot.com/ If you see these sites by "MOSAIC" or "Magazine" view, will make surf easier. Universal remote controls are available at most of the electronic spare part selling shops or online by Ebay or Alibaba.com.