20 Most Recent
RCA RCR311B Remote Control - Page 4 Questions & Answers
Code for universal remote for my olivera tv
The setup code is:1027 Visit this site for more details. Type in the site name
"Electro-help" either Google or Yahoo
search box [
not
in the address bar of your browser], and click search. It is an electronic equipments service help
site. All details you want are
there.
Note the position of
hyphen in between words in site name, when you type it in.
The site will appear as it is in
web; subtitled as service help to electronic home entertainement equipments.
Pull up older posts.
You can gather all details.
Sometimes, clicking on the ads by the side and bottom of each post might
give you more details.
Pull up older posts.
Code for rca rcr311b remote to sharp tv
Code
1006
for
Sharp
TV
Code
1012
for
Sharp
TV
Code
1026
for
Sharp
TV
Code
1095
for
Sharp
TV
Code
1111
for
Sharp
TV
Code
1112
for
Sharp
TV
Code
1171
for
Sharp
TV
Code
1173
for
Sharp
TV
I have a rca331b universal remote, how do i program my philips television with this device
Setup codes to check with Philips TV are: 0062 0204 0184 0208 0205 0206 0207 0004 0189 0183 0199 0200 0288 0456 0003 0008 0068 0075 0086 0087 0141
Direct Code Entry
- Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
- Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
- Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
- With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
Programing the aux button for cable tv on sanyo tv remote
Direct Code Entry
- Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
- Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
- Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
- With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
SONY REMOTE TO A ELEMENT TV CODES
Element TV ELEFT422 can be controlled by Sony BluRay Player remote model
# RMT-B118A by entering the code 04 (same as Goldstar and LG TVs)
I need a code for samsung 460
If the phone locked to a particular network then you need to unlock the network lock. You can get the unlock code through online. Give your IMEI number & get the unlock code for ur mobile .............You also get through online..........I will suggest the website
Unlock-Zone.com which is doing good service .....you can approach this website.
CODE FOR TURING TV OFF AND ON
My Sanyo TV will not turn on unless I use the rca 3-device universal remote to turn it on. I have lost the codes and instructions to the remote please help
Viewsat
This is what worked for me:
Manual Code Search and Entry
1. Manually turn on the TV
2. Press and hold the TV button The illuminated ON•OFF key turns on and remains on.
3. While holding the component key down, press and hold the ON•OFF key. The illuminated ON•OFF key turns off.
4. After holding down both keys for three seconds, the illuminated ON•OFF key turns back on.
5. Release both keys. The illuminated ON•OFF key remains on. TIP:
Throughout the programming of each key, be sure to keep the remote
pointed at the IR sensor of the component you are currently programming
the remote to control.
6. Press and release the ON•OFF key
repeatedly until your component turns off. Each time you press the
ON•OFF key, the illuminated ON•OFF key blinks, and the next
code
in the list is sent. This process continues until all of the codes in
the Code Lists have been searched. If your component turns off, you
have found the correct code.
TIP: Because there are so many codes, you may have to press the ON•OFF key many times-possibly up to 200 times.
7. Once you have found the correct code, you must save the new code by
pressing and releasing the STOP key. The illuminated ON•OFF key turns
off. You must press the STOP key to save the code or the correct code
will not be stored!
8. To confirm that the component key is
programmed with the correct code for maximum functionality, test the
component. Attempt to control a variety of the component's functions
with the remote. If some of the features of your components do not
work, try programming the remote with a different code in the list
until you find the code that allows the remote to control the majority
of your component's functions. Different codes can provide different
levels of functionality.
Good Luck
How to unlock ASM in
Hello
Universal remote codes for Sansui TV with RCA RCR311B remote control are:
1020, 1054, 1133, 1145, 1167, 1230
But I really don't understand to what do you mean by this ASM lock. ASM [Automatic Search Memory] is meant for tuning fuction. When we put the set to ASM mode, it should search all the available programmes at that time at appropriate chanels, and will stop; must stop; at the end of the tuning is over, and must show the first received programme. Then we can change the programmes as our own select. If ASM function does not works with your TV as specified above, surely its memory IC is in trouble; damaged; and should replace it with same type and number. This IC is an eight terminal one, can be located very near to main system control IC of your set. OK.
Not finding what you are looking for?