Top 20
D-Link DCS-6620 Network Camera - Page 7 Questions & Answers
Dlink Dsl -2730u
Two possible causes for this:
1. Power fluctuations has caused the AC to DC power supply to over supply the router with current. This will damage the router's electronics. Solution to this is to buy a new router.
2. Updated firmware: if you updated the firmware and the new firmware got corrupted during the download, you could experience that problem. I will suggest to revert back to a previous version if this occured.
Change language english
Depends where you purchased your router, if it is an English one you can reset by manually holding the reset button on the back.
If not, go to 192.169.0.1 and search for language and select English.
Can not set password
Straighten one end of a paper-clip.
Push it into the hole in the back of the router.
Hold it for 30 seconds.
The router is now set to "factory" settings,
including the original ID/password.
Web conection setting
Restart the router
the default ip is usually printed on the back of the dlink routers
you can also type ipconfig in cmd (start->run) and see the ip for the router
How can i get the arab chanel on my roku 3
Sir
Try lowering the security level on the Dlink router it's most likely set to high for the Roku to connect.
You can do this from the router's setup page on your computer. It's best to make changes from a PC that is connected with a network cable directly to the router.
Open a browser in the address bar type in 192.168.0.1 and hit enter.
The prompt for password XXXX come up the default for dlink router is admin proceed to next screen.
You will be at the dlink page click on "Wireless Settings" on the left side. Then click on the Manual Wireless Network Setup box.
Here you will see the wireless network name and security level change to WPA you can change the key also if you like to save the settings.
Try to connect your Roku to the wireless network.
I hope your D Link router Problem is solved by now,
Or In Case You still need Online D-link Router problem Help assistance then follow us on for
http://www.techsupportrouter.com/support-for-d-link-router.html
I need change password
Login to the router.
Enter the current password.
Use the router's web-interface to set a new password.
Can get configuration addess to work
Connect your computer to your router.
It should automatically get an IP-address.
Click the Windows "Start" button (Windows 7).
Type 'cmd' into the search-box.
Press ENTER.
Type 'IPCONFIG /ALL'.
Look for the IP-address of the "gateway", or the IP-address of the "DHCP-server".
That is the IP-address that you want to type into your web-browser.
License key
CALL THE MANFACTURE OF THE MODEM OR CALL THE COMPANY WHO PROVIDES YOUR INTERNET
Warranty check
In which way is the router not performing properly? Have you attempted to factory restore the router and have you tried to test the router in any way?
DIR 503
Usually you can login on your browser to you router and go to the management section to check for firmware updates and select that button and it will download and install the firmware. On some models, you have to go to the D-link web site and look for firmware updates for your router. Always check what you current firmware you have installed and check the version of you router modem (A, B, C etc). Then you can manually download the firmware (usually in a ZIP file), open the zip file, and then using your browser connected to the router look for Update Firmware. You will have to go to where (folder) you saved the downloaded update and select that file. It is recommended that you update using a LAN connection and not a wireless connection.
Wont download netfix
What model of TV? The problem is obviously with the TV, why not include that information?
Not finding what you are looking for?