Top 20 D-Link DCS-6620 Network Camera - Page 8 Questions & Answers

The D-link support desk can help with the default password to the unit, but can not tell you what your wifi password is. If you have a device on wireless you can go to the wifi adapter and usually check a box that says "show password in text". If that is not an option, log into the D-link and change the wifi password to something you know and can remember. Note: changing the wifi password will break the wireless connection to any existing thing that uses wifi. You will have to go to each device and change them to the new password.

Look for any lights that is missing.Try General Router Setup or GENERAL ROUTERS RESETING

It a common problem so you have to try many option as possible. try to update version of your Firmware, uninstall the wireless connection manager, reset the router if possible and Unplug the power of modem and your router for 10 seconds ,Power-up the router and modem, Log in to the status page for your wireless router and change the wireless setting for your router http://www.wikihow.com/Set-Up-a-Wireless-Network-by-Using-DLink-DIR635. For more Technical help get in touch with us

See details about your router's user guide / manual. First login inside router and enter these TATA Indicom settings: Router settings for TATA Indicom Broadband connection

Usually you can login on your browser to you router and go to the management section to check for firmware updates and select that button and it will download and install the firmware. On some models, you have to go to the D-link web site and look for firmware updates for your router. Always check what you current firmware you have installed and check the version of you router modem (A, B, C etc). Then you can manually download the firmware (usually in a ZIP file), open the zip file, and then using your browser connected to the router look for Update Firmware. You will have to go to where (folder) you saved the downloaded update and select that file. It is recommended that you update using a LAN connection and not a wireless connection.

Have you entered the wifi password on the tablet?

What is your OS and router model?

You can set up router without the CD. Look at the D-Link support site.

Help is here.... http://www.dlink.com/uk/en/support/product/dwr-512-wireless-3g-hspaplus-router

Use CCTV setups where your computer placed. You will be able to watch as well

unplug the router for 30 seconds and plug it back it dont unplug the wall cord just the little power cord on the back

Your wireless network card in your computer is failing, or the cable to the computer is bad. Because you said wireless internet, I am going to assume that you are connected to the internet via wireless nic. If your pc hasn't been rebooted for a while you may want to try a reboot and see if that doesn't fix the issue. However, if the problem remains you will likely need to get another wireless network card.

Go to the D-Link website under the support section and look for your model of router. There should be a downloadable manual in PDF format.

Your Connectivity may be on Wifi or Lan, ping the gateway and verify gateway IP is up and running if not then try to manually assign the IP to the system and try ping and if there is any proxy Please also remove the proxy from the internet settting and if still problem.Then reset the modem and then also set the IP of your system 192.168.1.2 and access the by default IP 192.168.1.1 and configure the acces point

Reset the router and on some models you can do this with a pin hole in the back or bottom. Also to change the settings on the router, you have to be connected by wire, you cannot use wireless.

Check to make certain you have the correct update. D-Link has model variations like "A" "B" "C" and each has a different update requirement. So if you tried to update your "A" model with "B" firmware, that might produce an error. Contact D-Link email or chat tech support for details.

the default username: admin the default password: admin if you've changed these before and cant remember it, then you have to reset the modem to its default factory settings. Look on the back of your router. There should be a small hole that only a sharpened pencil or pen tip will fit in. There is a button inside that hole. Press and hold it in for about 15secs. Your modem /router will reset to the factory defaults.

The steps for resetting the drive's password are detailed in the user manual: Link DNS 323 manual

Okay. You have to reset your router for factory default. The reset button may be located on back side or bottom side of your router. Power on the router and insert a needle through the reset hole for 10 seconds for reset your router. Give new password. Before you do this, keep in mind that your Internet connection's User name and password.

1st Image shows the connection's and in 2nd Image RED MARK BLINKING lights must be GREEN then only u will get the Internet. If any one light is Orange then ther is problem with u r Telephone line.