Samsung LN-S4092D 40 in. LCD HDTV - Answered Questions & Fixed issues
Horizontal multicolored lines appearing
Open up the TV and unplug and re-plug the connectors to the circuit boards. This is most often caused by a poor connection of the circuit board connectors.
3/25/2017 1:32:26 AM •
Samsung...
•
Answered
on Mar 25, 2017
•
157 views
Factory reset
To make a factory reset, you have to enter its service mode option.
If you wish to get more details, check this link. http://electronicshelponline.blogspot.com/ Selecting the view option, either to Mosaic
/ Time slide, can be selected by the drop-down list, at the top left
of the display window, will make surf easy. You can also do a search, by type in the brand name/model
number/IC used, in the search box at the top right of the display window.Service mode entry, adjust and exit procedure to many brand TVs are given in detail.
10/28/2013 5:44:25 AM •
Samsung...
•
Answered
on Oct 28, 2013
•
136 views
Samsung ln-s4092d no red tint
There are a few things that can cause this. Your t-con board, the signal board or the screen itself. The most likelly and cheapest would be the t-con board. This is the board that transfers your picture from the signal board to your screen. You would have to open up your tv and get the part number from the board itself.You can get get parts for this tv at www.interliquidparts.com
11/26/2011 9:42:05 PM •
Samsung...
•
Answered
on Nov 26, 2011
•
209 views
Samsung 40" tv won't turn on
i had the same problem, you'll have to call the samsung service center. You TV's part which looks after the voltage connectivity has failed. This majorly happens due to voltage fluctuations. The part will cost around Rs. 2800 and service charges will be applied by the company.
11/26/2011 8:19:48 PM •
Samsung...
•
Answered
on Nov 26, 2011
•
623 views
Do we need a voltage
no that is biggest scam now for consumer electronics that and over priced HDMI cables
just make sure you have some type of surge protector to protct unit
3/13/2011 2:32:55 PM •
Samsung...
•
Answered
on Mar 13, 2011
•
272 views
How do I access the service menu of my Samsung
with the TV off. press "Mute" "1" , "8" , "2" , "Power" on the remote (one at a time). But be careful when in there, you can change setting to keep your TV from ever working again.
3/9/2011 12:19:32 AM •
Samsung...
•
Answered
on Mar 09, 2011
•
481 views
LN-S4092D 40 in Samsung tv.
Hi,
Please take out main board and power supply of set 1 and 2 and test them in set 3 as it is still working, swap set 1 and 2 boards in set 3 just to narrow down problem.
Set 3 got lcd panel (screen) problem as it is showing white vertical line and lcd panel is very expensive part that would cost you approx new tv price so I would recommend to utilize its boards to fix/ repair set 1 and 2
Hope this will help you.
Thanks.
3/19/2011 7:54:16 PM •
Samsung...
•
Answered
on Mar 19, 2011
•
147 views
No picture and just sound
I would have to say the inverter(The board that lights up the screen) is bad.Thank You very much!
Tyler
12/10/2010 10:45:49 PM •
Samsung...
•
Answered
on Dec 10, 2010
•
89 views
I have a samsung 40
The fault you have mentioned is caused by faulty capacitors usually those on the Power supply board and/or SSB main board. I would suggest that you take a good look at the board and look for capacitors with swollen or cracked tops. The problem is caused by the caps unable to sustain their charge discharge cycle for a long time due to lost or corrupt electrolyte.
12/18/2010 7:38:37 PM •
Samsung...
•
Answered
on Dec 18, 2010
•
332 views
My two year old son pushed a button on the remote
try going to the tv itself and push the source/input button. you should go to the correct source to get your picture back. try looking for the input or source button on the remote as well. that should do the trick -gab
10/18/2010 3:58:10 AM •
Samsung...
•
Answered
on Oct 18, 2010
•
333 views
Do i need a voltage
try to use a ups it is more reliable than avr bec ups has a avr to
10/9/2010 1:52:50 PM •
Samsung...
•
Answered
on Oct 09, 2010
•
74 views
No picture but has sound. I read that the t con
Hello,
More than likely this will be down to your Y Sustain board has gone faulty, when the back is off your TV it is on the left hand side and will probbaly have a fuse that has blown, replacing the fuse will not solve the problem as it is the IMP under the heatsink that has gone faulty.
You should get the part number of the board from Ebay,com for a replacement.
Hope this helps
8/16/2010 10:41:10 PM •
Samsung...
•
Answered
on Aug 16, 2010
•
108 views
We have a Sony KD-28DX50 U digital tv. Since
Problem solved. Tele scrapped. Finally found a human being on one of Sony's "help lines" who said, as it is quite old set, software couldn't cope with large number (198) of digital whatsits. Got a nice, and cheap, replacement from Amazon at 8:30 next day.
10/22/2009 10:31:10 AM •
Samsung...
•
Answered
on Oct 22, 2009
•
119 views
Colored vertical lines with sound no picture
im afraid to say that your display has gone the best thing you can do is call the supplyer of the tv if its under warranty or call samsung. the cost of a new display will be 400 - 500 pounds so you may have to buy a new set.
3/10/2009 6:09:59 PM •
Samsung...
•
Answered
on Mar 10, 2009
•
736 views
Samsung 40 inch LCD LNS4092D No Picture
You need to check the back light is still on when the screen is blank (check through the back).
If the back light is on, need to change the Powwer Board.
but,
no back light, need to change the inverter.
3/1/2009 10:04:49 PM •
Samsung...
•
Answered
on Mar 01, 2009
•
980 views
Not finding what you are looking for?