Samsung LN-S4092D 40 in. LCD HDTV - Page 3 - Answered Questions & Fixed issues
Why dont i have a picture?
Hi, not sure if you have the same fault as i had, but our tv only had half the screen go off, after looking up on the internet i found a video for a fix, what you need to do is remove the back cover, there will be ribbons that go from the front screen to the main panel, i removed each one at a time and rubbed the contacts of the ribbon with a rubber on the end of a pencil, plugged them all back in and switched it on and it was now spot on, thats more than a year ago and its still working spot on, hope this helps
jim
3/1/2015 10:31:59 PM •
Samsung LN...
•
Answered
on Mar 01, 2015
•
203 views
Too bright/high contrast, unable to adjust. Tried to adjust from MODE: DYNAMIC, STANDARD, MOVIE=NOTHING, Tried-Background, Contrast, Brightness, Color, Tint, Gamma, Picture Factory Reset=nothing.
Fault with main board. Damaged component/s at it. Contact any service technician; or the authorized service center.If you wish to get some details; check the site linked here.Surf the site with patience.Pull up older posts.
http://electronicshelponline.blogspot.com/ .In most cases, the main board might have to be replaced.If so, a software [firmware] update too might be necessary.
9/30/2014 7:51:30 AM •
Samsung LN...
•
Answered
on Sep 30, 2014
•
243 views
Unqualified help.
hi did you put the capacitor in the right way round, the blue stipe on the cap is the negative, also what was the voltage? you can upgrade the voltage hope it helps
regards
shaun
5/29/2014 4:50:28 AM •
Samsung LN...
•
Answered
on May 29, 2014
•
257 views
Ln32d450g1d
These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit stage inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power led, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. Viewing it in "
Mosaic" will make surf easy.
http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience
4/3/2014 10:38:54 AM •
Samsung LN...
•
Answered
on Apr 03, 2014
•
260 views
Tv clicks on and off before going on
could be a capacitor that's ready to go .check the cross at the top of the capacitors are not raised up in any way even the slightest can cause problems. the capacitors on the left of image below are good and the big ones on the right are not.
3/12/2014 10:54:24 PM •
Samsung LN...
•
Answered
on Mar 12, 2014
•
66 views
Not finding what you are looking for?