20 Most Recent HP LaserJet 1320 Printer - Page 8 Questions & Answers

If you have driver CD, install it.. If not down load the drivers from below link, install the drivers.Link:http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=uk&prodTypeId=18972&prodSeriesId=410622&prodNameId=410624&swEnvOID=228&swLang=8&mode=2&taskId=135&swItem=lj-27308-6

Go to print setup page and remove blank page

The drivers are available from the HP web site at www.hp.com, Click on Support and the enter the printer model select your operating system and then the proper download will be available.

As Vishwanathu stated first try cleaning the pickup roller. It is located on the bottom of the printer. Remove the paper tray and you will find it as shown here.If cleaning the roller does not solve the issue then the roller kit will need to be replaced. The rubber tire gets worn down and become smooth, when this happens it can't grip the paper right to feed it into the printer. The roller kit for the Laserjet 1320 is available here:http://www.ccl-la.com/catalog/product_info.php?cPath=24_41_42&products_id=71I hope this helps, if so please rate my solution.BuddyMc

Paper misfeeds and failure to pickup the paper are both common symptoms of a worn pickup roller. This roller is on the bottom of the printer as shown in the attached picture. With use the rubber tire gets smooth and can't grip the paper enough to pick it up and push it into the printer. The roller kit is easy to install yourself and will get the printer back going as good as new. You can get the roller kit here:http://www.ccl-la.com/catalog/product_info.php?cPath=24_41_42&products_id=71I hope this helps, if so please rate my solution.BuddyMc

The drivers are located here. Download and install them for your operating system. If you need help just ask.

What software are you sending the print from? This might be set to a different paper size which is why the printer is asking to press the green button to use the paper loaded in the printer.Check the paper settings either in page set-up or in the printer properties when you are about to print.

Ink number HP49A. (Q5949A)

Is the paper size set on the computer for the size of paper you are printing to?Usually if you have to give a 'thumbs up' to the printer is because it is trying to print on an different size paper.

Have you connected it via Ethernet and installed the software on your office's server? If not then you will have to set it up as a USB or parallel on one pc and then all the other computers on the network will have to print to the IP address on the network of the PC it is connected to and then set up each machine to access that printer.

Is this with new cartridges or refilled?If refilled, the nozzles may have become blocked which isn't the easiest thing to clear. If new cartridges, take them back for a replacement at the store and try again with new ones