20 Most Recent HP LaserJet 1320 Printer - Page 5 Questions & Answers

If you're running a Mac, when you try to install the LaserJet 1320, it may suggest that you use the driver set for "HP LaserJet 1320 Foomatic/pxlmono." Do not use those settings. I had to reinstall my 1320 recently and since it said that was the recommended choice, I selected it. If I printed just text, it worked fine, but even a tiny 50KB image would take 5 minutes to print. When I reinstalled it again, I selected the option "HP LaserJet 1320 series," and everything works just fine now.

thanke

re- install the drivers from HP.com for the newest ones.

Here is service manual for HP 1160/1320 series ->http://filecom.net/CXW_R. Solution is on page 34. I hope it will help you.

The service manual is available here:http://www.ccl-la.com/catalog/product_info.php?products_id=284

You may download HP software and drivers from http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=410624&lang=en&cc=us&taskId=135&prodTypeId=18972&prodSeriesId=410622

You can see the the count in configuration page, to print configuration page do the following:To print the configuration page from the printer, press GO for 5 seconds, until the yellow light comes on, when the printer is in the ready state....

recharge(with new OPC, PCR and mag roller) or try another cartridge - if problem not solved - fuser film damaged

have you removed the plastic strip from the toner which secures your toner.

Hi,Click on the link below to download the drivers for your Laserjet printer. Choose the operating system to download and install.Download DriversRegards,Sean

yes when you give print command that time you choose the option by going in printer properties.and choose the desire page.

You can download the HP printer drivers from their support WEB site. Please click on this link and select your model printer to download :- http://welcome.hp.com/country/us/en/support.html

You may download the HP driver from http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?cc=us&prodNameId=410624&prodSeriesId=410622&swLang=8&taskId=135&swEnvOID=228

Go to "Devices and printer" and right click on the 1320, go down to "printer properties" and click. When the new box opens click on "device settings" tab and scroll down to installable option and find Duplex unit. Be sure it is set to installed, if not set it. Now your printer should duplex again.

could actually be the paper your using. make sure your using at the very least multipurpose paper or laser paper. check to make sure your settings for paper is also set to regular paper and not cardstock or special paper or anything else

Visit the HP website, go for "support and drivers" .Entering the page find for product support and troubleshoot, enter you printer model no. and click on search.You will get the list of the printer, just click on your model and look for how to setup, install and configure and other related topics whichever is helpful to you on the next page.** You can also avail our technical support by visiting our website: http://www.vtechsquad.com.

have you check the power source? if there is no light on the machine you have to bring out the power supply to test the fuses.

no memory cartuge,why?