Brother Hl3070cw Hl-3070cw Color Laser Printer - Page 8 - Answered Questions & Fixed issues

check for any error code, paper jam or toner is empty. If not try factory resting your printer.

Driver does not support OS. Reinstall the operation system and intall driver again.

Hello Tonny Here I recommended a blog where you will get 100 % solution don't wast your time by running here and there just visit https://www.printeralign.com/brother-printer-is-offline-how-to-get-it-online and get each and every solution.

Brother Printer In Error State Windows 10 & 8 The Brother Printer In Error State Windows 10 is a failure normally exposed when the printer is jammed, low in paper or ink, the cover is open, or the printer is not connected properly, etc. Here some relevant answers to fix this Brother Printer In Error State Windows 10. First Check your printer for a real problem which may be the cause of Brother Printer In Error State Windows 10. Indicate whether the link between your printer and computer uses frequently. Make sure your machines attach to each other well, try with Another USB port and the network or wire you use for the connection has no difficulty. Check all think that cause this Brother Printer In Error State Windows 10:- 1. Turn off the printer and check for paper jam 2. Check if the printer is low on ink 3. If you are using a WiFi printer, turn on the WiFi of the printer and the modem router. If the difficulty continues, check this blog or call Printer Error support services or a Printer Support to stop more printer damage the number is in this blog that is previously mentioned.

Brother Printer In Error State Windows 10 is an error normally exposed when the printer is jammed, low in paper or ink, the cover is open, or the printer is not attached properly, etc. Solutions of Brother Printer In Error State Windows 10:- 1. Beginning of all, you want to make sure that all the wires and joints of the printer are fit and don't have a loophole. 2. Make sure your machines connect to each other correctly, try with Another USB port and the network or cable you use for the attachment has no problem. 3. Further, Switch off the printer and check for paper jams then close all trays accurately. If it has a paper jam gently remove it. 4. Verify if the printer is low on ink, refill it if it is. If you are using a WiFi printer, turn on the WiFi of the printer and the modem router. FULL BLOG- Brother Printer In Error State Windows 10

The 4 blinking lights means that the fuser either got too hot or didn't heat in the expected time or there was a mechanical problem. See https://support.brother.com/g/b/faqend.aspx?c=us&lang=en&prod=hll2320d_us_as&ftype3=1968&faqid=faq00000170_025 . The first step of the diagnostic is to turn off the printer and wait for a bit. Turn it back on but leave the unit idle for at least 15 minutes. If the printer is under warranty, contact Brother. Otherwise, if the error repeats, you'll need to check whether a thermistor is faulty, the wiring has a problem or if one of the PCBs (control board) is faulty. Check the wiring harnesses for broken conductors and the connections for corrosion. If the fuser unit gets hot without getting excessively hot, then one of the thermistors isn't detecting the temperature or the message didn't get to the PCB. If the fuser unit stays cool or gets way too hot, then the fuser heating element (or the wiring between that part and the PCB) is a likely culprit. A service manual is available here: https://printcopy.info/?mod=erc&brand=Brother&model=HL-L2320D&page=3 . I hope this helps. Cindy Wells

• Launch the Start Menu.
• Go to the "Control Panel".
• Even you can use the shortcut keys i.e. Windows key + X.
• "Hardware and Sound" >>>> "Devices and Printers"
• Select and Right-click on "Brother Printer" option.
• Click on "Printer Properties" option.
• A new tab will open on your desktop's screen, and you will find the "Printer Properties" option.
• Select the "Ports" Tab
• Scroll down and check-mark the "Standard TCP/IP port" and select "Configure Port".
• Unmark "SNMP Status Enabled"
• Tap "OK" and Click on "Apply" Button.
• Reboot or restart your system and see whether your Brother printer is working or not. OR
• Go to "Control Panel".
• Click on "Hardware and Sound" option.
• Select the "Devices and Printers" option.
• Right-click on the Brother printer and tap on the "Remove Device" option.
• Tap "Yes" to confirm. This will remove the current selected Brother Printer.
• Restart your computer system once and during the restart unplugs your Brother printer.
• As it gets reboot/restart successfully, plug in the Brother Printer device and reinstall the Brother Printer drivers.
• After the successful completion of printer driver installation, restart your PC once again.

To set up your Brother machine on a wireless network:

1. Connect the power cord to your Brother machine and then connect it to an electrical socket. Turn your Brother machine on.
2. Press Menu button on the machine's control panel.
3. Press the Up or Down arrow key to select Network and press OK.
4. Press the Up or Down arrow key to select WLAN and press OK. (This step may not apply to all machines.)
5. Press the Up or Down arrow key to select Setup Wizard and press OK.
6. When WLAN Enable? appears, select Yes to enable the wireless network. This will start the wireless setup wizard.
7. The machine will search for your network and display a list of available Network Names (SSIDs). When a list of SSIDs appears, press the Up or Down arrow keys to select the SSID you wrote down earlier, and then press OK.
8. Do one of the following:
   • If using an authentication and encryption method that requires the Network Key (Password) Enter the Network Key, then press OK to apply your settings. Select Yes to apply the settings.
   • If your authentication method is Open System and your encryption mode is None Go to the next step.

See Step 15 in online instructions at the link below: http://www.shareyourrepair.com/2015/08/how-to-fix-brother-mfc-8950-replace-parts-pf-kit-1-error.html Step 15: Reset the PF Kit 1 Counter This will clear the "Replace Parts PF Kit 1" error that keeps coming up.

Step 15a: From the main menu simultaneously press both the 3 and 9 keys once.

You must access the secret reset menu to do this. If you don't time it correctly you will set the number of copies. If you do that just press the Stop/Exit button and try again. You DO NOT hold the keys down, just simultaneously press them once: Simultaneously press the 3 and 9 buttonsIf you do it correctly, you will see the reset menu on the display: The Secret Reset Menu

Step 15b: Tap "PF Kit1" on the screen.

Tap PF Kit1It will double check and ask you if you want to "Reset PF Kit1?" Tap "Yes." Tap YesIt should then say "Accepted" to let you know that the counter has been reset: After tapping yes it will say "Accepted"To get out of the Reset Menu press the Stop/Exit button: Press the Stop/Exit button to get out of the Reset Menu

here is the manual page for troubleshooting the error 1 i would check or the lose wires first and foremost along with the unplug and replug everything and return on the unit

https://www.youtube.com/watch?v=di9K38FrnNQ Load the document that you wish to scan into the Brother printer. Tap on the Scan button on the printer's control panel and select Scan To PC option. Choose the File option and click on Start Black or Start Color to begin scanning the document.

1. Place the Brother machine within range of your WPS or AOSS™ access point/router. ...
2. Make sure that the power cord is plugged in.
3. Turn on the machine and wait until the machine is in the Ready state.
4. Hold down the WPS or AOSS™ button on your WLAN access point/router for a few seconds.
5. https://www.youtube.com/watch?v=7kE9Sn3V8rI

Here is a Brother support page which includes a video on clear paper jams for this and related printers. It is the video near the bottom of the page. https://www.brother-usa.com/support/hl5470dw

Need more help? Talk to me directly. http://6ya.com/repairsolutions Make sure all previous printer software and drivers are removed before installing new printer.

https://support.brother.ca/app/answers/detail/a_id/136366/~/how-do-i-clear-the-message-replace-pf-kit-1%3F To do this, press the GO and + buttons at the same time until "Reset Parts Life" is displayed. Now press the + button until PF Kit 1 or 2 is displayed and press SET. The counter will now be reset. https://support.brother.com/g/s/id/pdf_pub/faq/faq00000141/pfkit_hl6050.pdf

Have you looked at the following site, which a a video on the wireless setup? https://support.brother.com/g/b/faqend.aspx?c=eu_ot&lang=en&prod=mfcl2700dw_us_eu_as&faqid=faq00100429_000

If the printer status is Offline Right-click the icon for your Brother machine > See what's printing > Printer > Use Printer Offline (remove the checkmark). If Use Printer Offline is greyed out, click Open As Administrator. Enter your administrator password, and then click Yes

How do fix the issue Brother's printer not Responding to Mac:

1. Click the apple menu icon, Click printer & scanners.
2. Right click the control click the list for the available devices.
3. Click on resetting printing system, click reset button to ensure printer is reset.

https://www.easyprintersupport.com/brother-printer-not-working-with-mac/

To set up your Brother machine on a wireless network:

1. Connect the power cord to your Brother machine and then connect it to an electrical socket. ...
2. Press the Up or Down arrow key to select the Network option and press OK.
3. Press the Up or Down arrow key to select the WLAN option and press OK.

https://support.brother.com/g/b/faqend.aspx?c=us&lang=en&prod=hll2360dw_us&faqid=faq00100429_003 https://www.youtube.com/watch?v=di9K38FrnNQ https://www.youtube.com/watch?v=kMAqUwnvADE

Error 0X000003EB is a printer error. If you are trying to attach a printer, but cannot do so because of the error code 0x000003eb, then you are in the most suitable place because we are going to teach today how to resolve this problem. The error report does not give you much message because it only means that the printer cannot be connected and provides you the error code 0X000003EB. Steps to Resolve Error 0X000003EB:- 1. Make sure Windows Installer Service is Running. 2. Perform Clean Boot. 3. Registry Fix. 4. The FULL solution is here--> Error 0X000003EB Before you start with the printer troubleshooting, one thing you require to monitor and make sure that your printer drivers are Up-to-date or Sometimes the reason behind Error 0x000003eb is the third party software disputes with Microsoft Windows which creates a problem while working with Windows 10. Error 0X000003EB is usually caused by wrongly configured system settings or different entries in the Windows registry. This error can be fixed with this blog which is mentioned.