Brother Hl3070cw Hl-3070cw Color Laser Printer - Page 5 - Answered Questions & Fixed issues
How do i resolve the issue of Brother Printer Error Code TS-07?
The Brother Printer Error TS-07 occurs when your brother printer can't detect a WLAN access point or router that has WPS or AOSS enabled. You can fix this Brother Printer Error Code TS-07 easily and quickly on your own by following the stepwise procedure specified below.
The step by step process on how to fix Brother Printer Error TS-07 is as follows.
- Firstly, ensure that your WLAN access point or router supports WPS or AOSS. You can check it either by looking for icons present on your router or by checking the documents that were provided with your WLAN Access Point or Router.
- If your brother printer is WPS or AOSS enabled, configure your wireless settings using automatic wireless mode (WPS or AOSS).
- Ensure that you operate both the brother printer and WLAN access point or router.
- For an undisturbed internet connection, place your Brother Printer within the range of your WLAN Access Point or the Router.
- Don't keep any signal emitting objects like mobiles around your brother printer or the WLAN Access Point/Router because these objects may disturb your WLAN Router or Access Point.
- Now press the 'Menu' option on your brother printer and then select the network and then tap on 'OK.'
- Now, with the help of the up and down keys on your printer, check for the WLAN network, select it and then click on 'OK.'
- Look for the WPS or AOSS option, select it and then tap on 'OK.'
- If the message 'WLAN Enable' appears on the screen, choose the 'accept' option. By this, the wired network setting will be disabled.
- If 'Network I/F switched to wireless' or 'Enable WLAN' message is displayed, click on the 'OK' option.
- Now hold on the WPS or AOSS button present on the WLAN Access Point/Router for some time. You have to hold the button located on your WLAN Router or Access Point.
- Then, press the 'OK' option. Now your Brother Printer will automatically detect the mode of your WPN Access point and connect to your wireless network.
- Now, on your printer's LCD screen, the WLAN report will be displayed and it will be printed automatically.
- If at all the connection fails, then check the error code on the printed WLAN report.
How do i resolve the issue of Brother Printer is in Error State?
Error State is a bit vague. The usually give error numbers. Unplug it count to 20 and plug it back in.
it may also be Printers Drivers ion your coputer.
You can do it in a few simple steps by unplugging the power cord from the wall outlet and then again switching it on. You can update or re-install the printer driver. According to many Brother Printer users, the Error State is often caused by the corrupting of the printer drivers
. The technicians also suggest the same.
..
How do i resolve the issue of Brother Printer Error Code E1?
here are the steps to solve the problem
1-Reset the printer.
2-Turn the printer on, in case it isn't now on.
3-Delay until the printer is inactive and quiet before you proceed.
4-With the printer turned on, disengage the force line from the back of the printer.
5-Turn off the force rope from the divider outlet.
6-Stand by somewhere around 60 seconds.
7-Attachment the force line once again into the divider outlet.
8-Reconnect the force rope to the back of the printer.
9-Turn on the printer, on the off chance that it doesn't consequently turn on.
10-The printer may go through a warm-up period. The printer lights may streak, and the carriage may move.
11-Delay until the warm-up period completes and your printer is inactive and quiet before you continue.
Next things to are:
Search for stuck paper.
Ensure the ink cartridge carriage moves unreservedly.
Utilize a robotized instrument to clean the paper rollers.
Physically spotless the paper rollers inside the information plate.
Not finding what you are looking for?