20 Most Recent
GE JTP15 Electric Single Oven - Page 5 Questions & Answers
After self clean, jtp15 panel does not work
This may be related to the F7 problem. The error does not always show up on the display. It typically develops after a self-clean cycle. Go to my solution at the following link:
http://www.fixya.com/howto/h155060-dreaded_f7_error
I have shared this solution with over 1500 folks and most report success. Let me know if this works for you at:
[email protected]
12/29/2007 2:23:55 PM •
GE JTP15...
•
Answered
on Dec 29, 2007
FO error code
f-0 is caused by the main control,called the erc. its gone bad only fix is to replace the erc
12/19/2007 9:54:50 PM •
GE JTP15...
•
Answered
on Dec 19, 2007
JTP15 Oven - Shuts down after preheating
It sounds like the module is momentarily losing power when the bake relay clicks off. Does it do the same thing when you use broil?
Post back with the complete model number and I will try to find the wiring diagram for it and we will walk through checking it.
Thanks/Mike
11/3/2007 4:39:10 AM •
GE JTP15...
•
Answered
on Nov 03, 2007
Display does not light up.
georgewms
The display is part of the ERC (control board) and is not repairable. If you will provide the complete model number for your oven (located on the door frame at the bottom left corner), I can find the best deal for you to buy the part.
Gendos...post back
2/20/2007 7:53:17 AM •
GE JTP15...
•
Answered
on Feb 20, 2007
Oven Light Will Not Shut Off - GE Range Oven Model: PS968SP1SS
If you have already replaced the Hi-Amp Door Switch on your GE Range Oven (Model: PS968SP1SS), but the oven light still will not turn off, there are a few additional steps you can take to troubleshoot the issue:
- Check the light switch: Ensure that the light switch is functioning properly. It is usually located near the oven door frame or control panel. Press the switch manually to see if the light turns on and off. If it is not working, you may need to replace the light switch.
- Inspect the light socket: Examine the light socket for any signs of damage or corrosion. If the socket appears to be damaged, you may need to replace it.
- Verify the wiring connections: Check the wiring connections between the light socket, the Hi-Amp Door Switch, and the main control board. Ensure that all connections are secure and properly connected. Loose or faulty wiring can cause the light to stay on.
- Test the main control board: As you suspect, a faulty main control board could also be the cause of the issue. You can try resetting the control board by turning off the power to the oven at the circuit breaker for a few minutes and then turning it back on. If the light still does not turn off, it may indicate a problem with the control board that requires replacement.
If you have performed these troubleshooting steps and the light still won't turn off, it would be advisable to contact GE customer support or a qualified technician for further assistance. They will be able to diagnose the problem more accurately and recommend the appropriate solution.
6/18/2023 4:55:39 PM •
GE Ovens
•
Answered
on Jun 18, 2023
I have a GE rapid clean II J55BF-1 wall mount oven needs to replace the baking element. Did someone happen to know the part number of the replacement baking element ?
To find the correct replacement baking element for your GE Rapid Clean II J55BF-1 wall mount oven, you can try the following steps:
- Locate the model and serial number of your oven. This information is usually found on a label on the inside of the oven door or on the back of the oven.
- Visit the GE Appliances website or use an online appliance parts retailer to search for the part using your oven model number.
- Look for the baking element part number in the oven's user manual or service manual. These manuals may be available online or from the manufacturer.
- If you are still having trouble finding the correct part number, consider contacting the manufacturer's customer service department for assistance.
Once you have the correct part number, you can order the replacement baking element and follow the manufacturer's instructions for installation.
2/26/2023 11:58:18 AM •
GE Ovens
•
Answered
on Feb 26, 2023
Not finding what you are looking for?