Braun KMM 30 Electric Burr Grinder - Answered Questions & Fixed issues

There is a link to them on the Braun website. Here's a link to the English version:

http://www.service.braun.com/line/HH/H3045/H3045_2_NA.pdf

You can first try cleaning the burrs, but they are most likely worn and will need to be replaced.
Here is the number for Braun 1-800-816-0810

Use quick steel putty to make a new connection for the switch. Tou can shape it and let it harden. Once it is hard sand to proper shape and fit.

www.theessentials.com

In particular:
www.theessentials.com/jump.jsp?itemType=PRODUCT&itemID=399

You need both the knob and the spring clamp ring.

I dug in and found your manual at Braun. Take this link and select the second choice to print your 9 page manual. Let me know if further assistance is needed.

http://www.service.braun.com/product/search.asp?rg=NA&c=US&l=GB&typ=ui&frmTyp=s&sgrp=s&grp=HH01%3C%7C%3E&s=kmm30&subgrp=0

L'entonnoir tient par 3 pattes sur la base d'ajustement de la grosseur de mouture.

Pour retirer l'entonnoir, il faut oter les grains, prendre l'entonnoir dans une main et le reste de l'appareil dans l'autre. Dans un geste délicat mais tout en bougeant un peu l'entonnoir de gauche à droite en tirant vers l'extérieur, il se détachera.

Cette démarche vous donnera accès à l'entrée des grains et vous pourrez la nettoyer SANS EAU avec une vieille brosse à dents et une pointe de couteau fine pour les endroits étroits ou pour décoller les résidus de café.

Une fois cet entretien fait, les grains vont descendre de manière normale et fluide vers le moulin et la mouture sera constante.

On my Braun mill, I unscrew the single phillips screwon the receptacle end of the bottom. The other end is held by a plastic tab so I have to push the bottom plate slightly backward. When the bottom lplate comnes out a little, it has to be slid on the power cord to get it out of the way. Thlis did not ge the machinery out of the housing, but it allowed me to tap out nearly a cup of caked coffee. Hope this helps

Hi there

the following should be the link to your manual

http://www.service.braun.com/line/HH/H3045/H3045_1_MN.pdf

Best wishe

My grinder went from bad to worse and finally stopped grinding (with the motor still buzzing but absolutely no grinding). Knowing I had to do something or throw it away, I pulled the clear plastic bean reservoir upward and separated it from the grinder body. I looked down the hole where beans go down to the grinder and found packed coffee ground blocking the hole. I cleaned the whole thing, put the reservoir back, and my grinder now works like new :-)

I found a couple of them...
User guide
http://www.service.braun.com/line/HH/H3045/H3045_2_NA.pdf
Multi language manual
http://www.service.braun.com/line/HH/H3045/H3045_1_MN.pdf

Check out a couple of these sites.. https://duckduckgo.com/?q=+fix+the+hopper+on+my+Braun+4045+coffee+grinder&t=ffab&atb=v159-1&ia=web&iai=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DXgg_HqPIPzY&pn=1

Edited question for clarity. Moved from 'Cars and Trucks' category to Braun Coffee. Take it apart and test the switch. It may be brushes on the motor. your problem will be getting spares. This machine was released in 1965. https://www.google.com/search?q=braun+kmm1+switch+replacement ..

Google it with model number and print it out or call co. For original

google the answer. it is on google search.

I searched using https://www.google.com Apparently Braun doesn't have the manual available anymore. A link below apparently from 2007 still works, and has some receipes and instructions. https://www.chowhound.com/post/braun-yogurt-maker-instructionsmoved-ontario-board-459248 https://www.chowhound.com/post/braun-yogurt-maker-instructionsmoved-ontario-board-459248

do online search for your area or purchase

Hello Thomas Lienhard, It only has two screws in the bottom... Tighten them... (only). If you take it APART the switch mechanism is fragile & complex. You will be sorry. Carnac the Magnificent

I am sure you have a reset button. If the coffee maker is still fairly new you can take it back to the store one one that sells this brand and might just replace it. What you have is a short.

have you searched for the user manual online or the technical manual for that model ?